©2010 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS002960 RevE 7/12
Garden Speaker
To Install Head Unit on Base:
1.Remove temporary cover, if present. Retain screws.
2.Attach the purple wire from the head unit to the positive input wire and the black to the negative.
3.Line up the 3 “feet” on the head unit with the holes in the base.
4.Push the head unit down into the holes and turn clockwise to lock the head unit in place.
5.Put a 1"
6.Put
7.Select transformer tap wattage or 8Ω input position using a dime or small screwdriver to adjust stepped switch. (Switch is located on the underside of the “domed” section of the head unit near outer edge.) Insert red weather protection “plug” into recessed switch cavity using thumb to press the cap into place. (See Figure 2)
Garden Speaker Specifications
Frequency Response | 43Hz – 20kHz (±7dB) |
Sensitivity (1W / 1M) | 89.5dB (Half Space Reference) |
Power Handling | 70 Watts RMS |
Horizontal Dispersion | 360° |
Speaker | Coaxial 8", Polypropylene / Kevlar Cone with |
| Rubber Surround, |
| 1⁄2" Mylar Dome Tweeter, |
| 11⁄2" Voice Coil, 21oz Magnet |
Transformer | 8, 16, & 32 Watts, with an External Switch for |
| Tap Selection and for Bypassing Transformer |
Dimensions |
|
Tall Base Width | 175⁄8" (448mm) |
Tall Base Length | 175⁄8" (448mm) |
Tall Base Height | 207⁄8" (531mm) |
Short Base Diameter | 151⁄8" (384mm) |
Short Base Height | 131⁄8" (334mm) |
Head Unit Weight | 13.2 lbs (5.99Kg) |
Short Base Weight | 2.4 lbs (1.09Kg) |
Tall Base Weight | 6.4 lbs (2.9Kg) |
1601 JACK MCKAY BLVD. | TELEPHONE: (800) |
ENNIS, TEXAS 75119 U.S.A. | FAX (800) |
2/2
Speaker
Head Unit
Figure 1
Figure 2
AtlasSound.com