22 DVA-3210
SPECIFICATIONS
Dimension (WxDxH) : W 262 mmX D 175 mmX H 82 mm
Weight : 2.5kg
Supply voltage: 12V DC Nominal, 11-16V operating voltage*
Temperature: 0o to 50o Celsius*
Current consumption: Less than 3.0A
Video:
Television System: NTSC/PAL
Aspect ratio: 4:3, 16:9
TV encoder resolution: 10-bit DA converter
Video Signal-to-noise ratio: 65dB
Discs played:
DVD video discs—
5“ and 3” (12 & 8 cm) single-sided, single and double-layer
Compact discs (CD-DA, VIDEO-CD, CD-R)—
5“ and 3” (12 & 8 cm) disc
Audio output level: 700mV RMS
Audio signal output characteristics:
Frequency response: 20 Hz - 20 kHz (CD audio/44.1kHz sampling
rate)
S/N ratio: 90 dB (JIS)
Crosstalk: -75dB
Dynamic range: Above 85dB
Distortion: 0.02% (1 kHz)
Digital audio output: SPDIF optical output (IEC 958)
* Note: Use of the DVA-3210 beyond the safe operating ranges listed
can cause temporary or permanent damage to the unit, and such dam-
age may not covered by the manufacturer’s warranty.
TROUBLESHOOTING
“Tinny” sound.
Check the “Downmix” setting in the SETUP menus and
ensure that it is set to “Stereo,” not “LT/RT.”
No sound
Make sure that the audio output is set to “Analog”, under
Audio, Audio Out.
Picture distorts, “rolls”, appears black and white.
Check that the TV Type setting is correct for the monitors
being used. (See “Changing the Video Output Mode”.) PAL
video often “rolls” on NTSC monitors.
With a widescreen 16:9 monitor, I have black bars on the
top and bottom of my screen.
Change the TV Display mode to “Wide” in the Setup Menu.
The DVA-3210 does not track discs well.
Make sure the side spring adjustments are correct.