Owner’s Manual

PA1001G Power Amplifier

 

 

Placement and mounting of the PA1001G

Turn off all equipment before making connections. Mount amplifier in a standard-width 19” rack. It can be mounted above or below anything that does not generate excessive heat. Although the unit’s chassis is shielded against radio frequency and electromagnetic interference, extremely high fields of RF and EMI should be avoided.

Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the PA1001G should not be situated on sealed cabinet or on a shelf with obstacles on it that may impede the flow of air through the ventilation openings. It is recommended that if the amp is not used in an open air pole mount that it be rack mounted into a commercial rack.

Heat - The PA1001G should be situated away from heat sources such as radiators, heat registers, stoves, or other appli- ances (including amplifiers) that produce excessive heat. Ambient temperatures should not exceed 113° F (45°C) when equipment is in use.

Video Pole Mount – The PA1001G is ideally suited to be used in board or class room video / audio applications. The PA1001G incorporates a 2” diameter hole trough the center of the chassis to allow for sharing the same support pole that standard ceiling video projectors mount to. Enclosed with the PA1001G is the support bracket and hardware to mount the PA1001G to a pole. Follow the below instructions for proper installation.

1.Make sure the pole you are mounting the amp to does not exceed 2” or 51mm. Common pipe to use for video projector mounting is 1.5 ID plumbing pipe. The OD for this pipe is 1.9” or 49mm.

2.Make sure the PA1001G is unplugged from the AC source.

3.Remove the top and bottom hole plugs.

4.Secure the pole support bracket using the four screws as shown in the diagram below. Note: the support bracket may be installed on the top or bottom of the amplifier.

5.Slide the amplifier up the pole. Do not force the amp onto the pole. Pay attention to orientation of the amp.

6.Secure clamp by tightening the two 1⁄2 clamps around the support bracket. Do not over tighten.

7.Once the PA1001G is secured to the pole do not mount any additional PA1001Gs to the same bracket. The sup- port bracket is only designed to support one PA1001G.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

– 11 –

AtlasSound.com

Specifications are subject to change without notice.

Page 11
Image 11
Atlas Sound specifications Placement and mounting of the PA1001G

PA1001G specifications

The Atlas Sound PA1001G is a powerful amplifier designed specifically for commercial applications, delivering high-quality sound with exceptional reliability. As part of the Atlas Sound family of products, the PA1001G is engineered to meet the demanding needs of professional audio systems, making it an excellent choice for schools, gyms, conference rooms, and retail spaces.

One of the standout features of the PA1001G is its robust power output of 100 watts, offering enough amplification to serve medium-sized areas without compromising sound quality. The amplifier has a comprehensive frequency response range, ensuring that both low and high frequencies are reproduced accurately, enabling a rich and immersive listening experience.

The PA1001G is equipped with a built-in mixer that provides the capability to connect multiple audio sources, including microphones and playback devices. This mixer allows users to adjust levels and mix audio seamlessly, which is particularly beneficial for environments that require announcements, music playback, or presentations.

Another notable technology integrated into the PA1001G is its priority paging feature. This allows for quick communication in emergency situations, as the system automatically prioritizes the microphone input over other audio sources. This feature is crucial for maintaining safety and ensuring that important announcements are heard loud and clear.

In terms of connectivity, the PA1001G offers multiple input options, including balanced XLR and unbalanced RCA inputs, making it versatile enough for various audio setups. The amplifier also supports a variety of speaker configurations, providing the flexibility to create tailored audio solutions based on the specific needs of the installation.

The chassis of the PA1001G is designed with durability in mind, featuring a rugged construction that can withstand the rigors of daily use. Additionally, it includes advanced heat management technology, which helps maintain optimal operating temperatures and enhances the longevity of the unit.

Overall, the Atlas Sound PA1001G is a reliable and versatile amplifier that stands out for its impressive power, flexibility in connectivity, and innovative features tailored for commercial use. Whether for background music, public address systems, or dynamic presentations, the PA1001G serves as a strong contender in the professional audio market, ensuring that users receive a high-performance experience with every use.