Atlas Sound Speaker Vt / Vtf Series Accessories Order Separately, Enclosures, Baffle Cover

SE

TVTA

SFP

AR

SI

VTC

FP

MR

VT / VTF SERIES ACCESSORIES (ORDER SEPARATELY)

ENCLOSURES

Model SE. Surface-mounting exterior backbox provides weatherproof installation for VT Series loudspeakers. Unit is tapped for 1⁄2" conduit and includes a weatherproof gasket. Dimensions:

41⁄4" SQ x 2" D (108 x 51mm). Weight is .75 lbs (.35 kg). Housing is die-cast zinc finished in a durable epoxy. Suffix model with color designation: Red (R) or Neutral Gray (N).

Model SI. Surface-mounting indoor backbox for SVT Series models mounts to any single or double-gang backbox for concealed conduit applications. CRS unit includes 1⁄2" conduit knock- outs (three on each side; five on rear). Epoxy-finished surface. Dimensions: 4" SQ x 11⁄2" D (102 x 38mm). Weight is .7 lbs (.3 kg). Suffix model with color designation: Red (R) or Neutral Gray (N).

Model TVTA. Twin housing for bi-directional mounting of two independently powered VT Series models. Unit is recommended for wall or ceiling installation in corridors and walkways. Each unit includes 23⁄4" D (70mm) housing with base and adapter plate for parallel mounting to any 4" SQ or single-gang electrical backbox for distortion-free, bi-directional projection. Weight is 1.5 lbs (.7 kg). Suffix model with color designation: Red (R) or Neutral Gray (N).

BAFFLE COVER

Model VTC. Baffle cover converts Model TVTA (above) into a uni-directional unit for single loudspeaker installations. Die-cast zinc construction is finished in baked epoxy and is identical to the VT Series loudspeaker housing. Dimensions: 41⁄4" SQ x 17⁄8" D (108mm x 48mm). Weight is .5 lbs (.2 kg). Suffix model with color designation: Red (R) or Neutral Gray (N).

ADAPTER PLATES

Model SFP. Semi-flush adapter plate mounts behind VT Series to cover any recessed 4" SQ x

11⁄2" D (102mm x 38mm) outlet box. CRS wall plate is stamped and painted. Dimensions: 6" SQ x

7⁄32" D (152mm x 6mm). Weight is .5 lbs (.2 kg). Suffix model with color designation: Red (R) or Neutral Gray (N).

Model FP. Flush adapter plate for VTF Series loudspeakers allows recessed mounting to stan- dard 411⁄16" (119mm) backboxes. Unit is also suited to mount solid exterior or hollow interior wall surfaces where a backbox is not required. Weight is .4 lbs (.18 kg). Unit is of CRS stamped construction; not painted.

ADAPTER RINGS

Model AR. Adapter ring for recessed mounting of VTF Series units. Welded steel collar is 4" SQ x 2" D (103mm x 51mm) to provide necessary extension for any 4" SQ x 21⁄8" D (102mm x 54mm) E.O. box. Weight is .6 lbs. (.27 kg). When assembled, the unit is 31⁄16" deep and will fit in a standard 4" stud wall. Assembly includes four “S” clips. Finished in neutral gray.

Model MR. Overlapping extension ring is equipped with clips for recessed mounting of VTF Series models. Welded steel collar is 411⁄16" SQ (I.D.) x 2" D (119mm x 51mm) to provide exten- sion for any 411⁄16" SQ (O.D.) x 21⁄8" D (119mm x 54mm) backbox. When assembled, the unit is 31⁄16" deep and will fit in a standard 4" stud wall. Assembly includes four “S” clips. Weight is .7 lbs (.3 kg). Finished in neutral gray.

Specifications subject to change without notice

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 /FAX (800) 765-3435

© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL6-1439