Atlas Sound DT, TS302A, TPS24-05 Pt Option Push-To-Talk Button Switch, DY-1 DYNAMIC TRANSMITTER

PT Option

Wiring

Diagram with

Push-to-Talk

Switch

TPS24-05

PT OPTION: PUSH-TO-TALK BUTTON SWITCH

This factory-installed option consists of a standard “500” style handset with the addition of a pushbutton switch located conveniently on the handset. The switch-contact arrangement is form “C” (SPDT) and is wired as form“A” (SPST). Configuration is ideal for use in relay-control, push- to-call, and a variety of other switch, communication, and signaling applications. It is available

on CE-2A and DP-1A by adding a (-PT) suffix.

DY-1 DYNAMIC TRANSMITTER

This accessory is designed for installations in which the telephone handset would be used as a paging microphone. The dynamic transmitter is the low-impedance type suitable for input to the Lo-Z microphone input of the amplifier. Assembly replaces the carbon transmitter with a moving coil (dynamic, 500 ohms @ 1KHz with a response of 250-5000Hz) transmitter that has an impedance of 500 ohms @ 1 kHz.

ACCESSORIES & REPLACEMENT PARTS FOR CE SERIES AND MODEL DP-1A

MODEL	DESCRIPTION	COLOR	WEIGHT
RU-1	Receiver	-	.5Lb. (.2 kg.)
TU-1	Transmitter	-	1.5 Lbs. (.7 kg.)
DY-1	Dynamic Transmitter	-	1 Lb. (.4 kg.)
CEK-1A	Cord	Neutral	.5Lbs. (.2 kg.)

TELEPHONE POWER SUPPLY FOR COMMON-TALK SYSTEMS

TPS24-05The TPS24-05 is a combination 24 VDC / TALK voltage power supply, engineered to power most common-talk telephone intercom systems. (See SL5-1425 on DC power supplies and SL8-1433 for common-talk telephone intercom applications.) Black epoxy finish with a 6’ power cord.

INPUT	OUTPUT	RIPPLE	REGULATION	DIMENSIONS	WEIGHT
	(Nominal)	(Talk Voltage)	(0-Full Load)	L x H x D
117 VAC,	24 VDC @	.5 mV & TALK	500 mV	63⁄4" x 35⁄8" x 2"	3.0 Lbs.
@ 60 Hz, 26 Watts	1/2 amp	voltage output		(171 x 92 x 51 mm)	(1.4 kg)

LT600-VC

600-OHM IMPEDANCE MATCHING TRANSFORMER

LT600-VCVersatile unit matches line level, 600-ohm line circuits with HI-Z circuits. It can also be used as a 600-ohm to 600-ohm isolation transformer. Recommended for coupling of line level audio or common-talk phones into amplified sound systems, background music and paging systems, recording equipment, or studio electronics. Built-in potentiometer provides optional adjustability for the 25K output level. The 600-ohm input may be matched to 600, 10K, and 25K- ohm circuits. All components are mounted on a printed circuit board. Steel chassis includes mounting ears and “insta-mount” tape. Transformer is shielded to minimize induced hum. Unit includes a phono jack on the output side for convenient connection to amplifier or other equip- ment circuitry. Jack can be connected to various transformer taps via barrier strip jumper. (Factory-installed jumper connects jack to potentiometer output.)

INPUT IMP.	OUTPUT IMP.	FREQUENCY RESP.	DIMENSIONS	WEIGHT
600 Ohms	600, 10K,	60Hz-12KHz	47⁄8" W x 31⁄8" H x 13⁄4" D	2.5 Lbs.
	25K Ohms		(124 x 80 x 44mm)	(1.1 kg)

SCHEMATIC CIRCUIT BOARD

Specifications subject to change without notice

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435

© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL8-1434