2 PROGRAM INTELLICODE® 2 REMOTE TO POWERHEAD
| Bring remote(s) to powerhead location. |
|
| |
©2010 | Begin with Step 1 and continue through Step 7 for each button to be programmed. | |||
NOTE: The following instructions are for the remote(s) provided with this opener. This | ||||
The | remote is preset for use with the IntelliCode® 2 Access Security System. Refer to page | |||
16 for additional information on IntelliCode® 1 and 2 remotes and how to switch from | ||||
Genie | IntelliCode® 2 to IntelliCode® 1. See page 10 for programming instructions using | |||
IntelliCode® 1 remotes. |
|
|
| |
Company | 1 PRESS and HOLD | 2 | 3 | RELEASE |
|
|
|
| PRESS and |
FOR
WARNING
A moving door can cause serious injury or death.
1.Keep people clear of opening while door is moving.
2.Do NOT allow children to play with opener, including wall console, remote, or wireless keypad.
3.During programming, door opener could begin to run, so stay away from moving door and its parts.
4
PROGRAM
SET
— | + |
|
RELEASE
PROGRAM
SET
— | + |
|
PRESS and
RELEASE
SEE BOTH Blue LEDs come ON
SEE round Blue
LED come ON
SEE long Purple
LED flashing
SEE both LEDs flash Purple
12/2010 | 5 |
|
PRESS and
RELEASE
SEE both LEDs
flash Blue
6
SEE both LEDs OFF
7
PRESS and
RELEASE
The next press of the remote will operate door.
Repeat as necessary for other remotes.
Basic powerhead programming is complete. Your garage door opener is ready to use.
9
