©2010 The Genie Company

6

PRESS and

RELEASE

PR OGRAM

SET

 

SEE long Blue LED flashing

B) OPEN DOOR TRAVEL LIMIT

7 PRESS and HOLD until door is FULLY OPEN then RELEASE

M

 

 

RA

 

+

 

 

 

Watch door move

NOTE: You can start and stop door

movement using either buttons until door is in correct open or closed position.

8

PRESS and

RELEASE

PR OGRAM

SET

 

Door Limits are set.

Both LEDs flash Blue

and go OFF.

Continue with Step 9 SET FORCE.

12/2010

9SET FORCE Force is set automatically with first full CLOSE/OPEN door operation.

On Wall Console

PRESS and RELEASE

DOOR CLOSES

10

On Wall Console

PRESS and RELEASE

DOOR OPENS

NOTICE

Perform a successful CONTACT REVERSE TEST and then continue with remote programming.

NOTE: To reset LIMIT settings, repeat Steps 1-10.

7

Page 7
Image 7
Genie 4024H manual Open Door Travel Limit, See long Blue LED flashing, Door Limits are set, Both LEDs flash Blue Go OFF