Atlona AT-H2H-44M, AT-H2H-88M

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

Note: Be sure to save all changes before moving to the next page

The network set up page will allow the IP information to be changed. When a change is made the

screen will grey and the ability to save or cancel will display at the bottom (see below).

Note: When DHCP is on, the IP cannot be configured. Turn DHCP off to enable IP configuration.

Note: For a stable connection, when using a control system it is best to set up a static IP.

a username and password will be required on all IP connections to the matrix.

Note: Login Mode should not be used when using a control system.

Note: The username and password used in IP Login Mode will be the same login information as

the WebGUI

Contents

Main Table of Contents atlona.com Introduction Features Package Contents Panel Description Front Panel IR atlona.com Back Panel atlona.com Local: 1-408-962-0515 AT-H2H-88M ARC Connection Diagram atlona.com I/O Control Matrix Front Panel Functions atlona.com I/O Route Memory atlona.com EDID Set Up Page Page Matrix Settings View Firmware/Baud Rate/FPGA settings View I/O settings Audio Return Channel (ARC) Steps S/PDIF Matrix source audio loop-out RS-232 Connection Set Up TCP/IP TCP/IP WebGUI Page Page Page Page Page Page Page TCP/IP Commands RS-232 & TCP/IP Control Commands The command codes are case sensitive, do not change capitalization, spacing, or lettering. TCP/IP Commands Cont. Remote Control Updating and Resetting Updating firmware Resetting to factory settings Specifications Safety Information Safeguards Precautions Atlona, Inc. (Atlona) Limited Product Warranty Policy Coverage Coverage Periods Remedy Exclusions Atlona, Inc Product Registration