Atlona AT-H2H-44M, AT-H2H-88M atlona.com

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

To copy an EDID

---> ---> ---> --->

AT-H2H-XXM

Select Input Number

Select Function Option

home screen

1 To copy up to X EDIDs

2 To choose input EDID --->

---> Copy from output #

Save to Memory (1-4/8) #

Copy from output #

Save to Memory (1-4) #

Feedback=

”Saved port # EDID to

Memory # [Failed/Passed]”

--->

Before an EDID can be loaded to an input, it must first be copied to the matrix’s memory. Each

display’s EDID can be saved individually to one of the matrix’s EDID memories.

memory selection

output selection

When the matrix is completely connected and turned on it will load the default EDID, which is the

highest common native resolution of the connected devices. (i.e. In the diagram below the default

would be 720p with 2ch audio. Multi-channel audio and 3D are not enabled on internal

mode, unless all devices have these features.)

EDID Set Up

Output 2

Output 3

Input 2

1080p-Dolby TrueHD (3D)

Input 1

Output 1

720p-2ch

1080p (3D)-2ch

1080p-Dolby TrueHD (3D)

AT-H2H-88M

DC 24V

ENTER POWER

EDIDMEMORY

ALL

DEFAULT

CANCEL

FUNCTION

123

5678

COAXIAL OUT

HDMI OUT

HDMI IN

RS-232

ETHERNET

IR IN FIRMWARE

1 2 34 5 6781234 5 678

1234 5 678

On default, all devices in the diagram will work at 720p. If a device is not syncing or a different

resolution is required, internal EDID or EDID copy and load should resolve these issues. The AT-H2H

can copy multiple EDIDs to memory.

through