5
Remote Control
1. Matrix IR IN: Used to control matrix I/O switching from a 3rd party IR control box or supplied
IR remote. Connect included IR receiver (see below) or mono IR cable (sold separately)
2. RS-232: Connect to this port for control from a computer or 3rd party controller.
3. Firmware Update: Type B USB Port used for updating the matrix firmware only
4. Coax Out: Audio Loop-out for Amplifiers and AVRs
Compatible with PCM 2Channel, LPCM 5.1, Dolby 2.0, Dobly Digital 5.1, and DTS 5.1
5. Ethernet Port: Future feature (TCP/IP control) through firmware update. Not enabled at this time.
6. HDMI Input Ports: Connect HDMI sources into these ports, such as DVD players, Blu-ray players,
computers, etc.
7. HDMI out port: Connect to a display or an AVR
8. Power Port: Use included locking DC adaptor to power the matrix switcher
Output selection. Numbers correspond with the HDMI outputs
(1-8) on the matrix.
IR Receiver
Input selection. Numbers correspond with the HDMI inputs (1-8)
on the matrix.
Arrow buttons are not functional for this product.
atlona.com Toll free: 1-877-536-3976
Local: 1-408-962-0515
Back Panel
5 6 7 8
41 2 3