Atlona AT-H2H-88M Panel Description

---> --->

--->

AT-H2H-88M

Select Input Number

Select IR 1: On 2: Off

Current: On/Off

Select Function Option

IR On/Off Selected

home screen

Hold for

5 seconds

Select IR 1: On 2: Off

Current: On

Select IR 1: On 2: Off

Current: Off

--->

----------------

The IR receiver window can sometimes pick up extra signals or commands, so the ability to turn IR

on or off has been made possible through the front panel. See below directions.

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515

Panel Description

Front Panel

1. IR Receiver Window. Receives the signal from the included IR Remote Control or a 3rd party IR

Controller.

2. Power Button. On (blue backlight) or Standby (red backlight) mode.

3. Enter Button. Use to view current status for inputs and outputs or to confirm a command.

4. Number buttons. Use these buttons to select input and output paths or use with the function

button to change multiple matrix settings.

5. Function Button. Allows you to select command options. (blue backlight when selected)

A. Default: Mirrors all inputs to corresponding outputs. (i.e. 1 to 1, 2 to 2, 3 to 3, etc.)

B. All: Save a single input to all the outputs with this function.

C. Memory: Save/load the current input and output route to memory.

D. EDID: Save/Load EDIDs to individual inputs.

Note: Default setting for EDID is the highest common HD resolution of all connected

devices. (i.e. if you have resolutions ranging 720p 2Ch audio, 1080i 2Ch audio, and

1080p multichannel audio then 720p 2Ch audio would be the default resolution for all

connected displays.)

6. Cancel Button. Use to go back one screen or press multiple times to return to the home screen.

Note: You cannot power off or change functions unless you go to the home screen.

21 3 4

6 A B C D