Atlona AT-HD-V1616M user manual IR Remote Control, Tcp/Ip

IR Remote Control

Input Selection:

Press the number corresponding with the input you wish to select, for numbers 10 and above select 10+ and the number following. Example: 10 = 10+ and 0

Menu Selection:

Choose the action you wish to perform. At this time with just the AT-HD-V1616M the only menu items you will use are AV and ALL. Example: Input 3 with output 5. Press #3 in the input section, press AV, and then press #5 in the output section. The LCD display will show the input as 3B5 on its screen.

Output Selection:

Press the number of the corresponding output (display) you wish to select. For numbers 10 and above, select 10+ and the number following. Example: 13 = 10+ and 3

Note:

Multiple outputs are not selectable through the IR Remote control at this time. They are available through the front panel, TCP/IP and RS-232 controls.

TCP/IP

TCP/IP is another way to control your AT-HD-V1616M. Connect with an ethernet cable to your network or computer. After connecting the cable you’ll need to configure the IP on your computer.

IP address:	192.168.0.80
Subnet mask:	255.255255.0
Default gateway:	192.168.0.1
Preferred DNS:	202.96.134.133
Alternate DNS:	202.96.128.68

Use a straight cable to connect to a router or network.

Use a crossover cable to connect directly to a computer.

Toll free: 1-877-536-3976	6	atlona.com
Local: 1-408-962-0515