Atlona AT-HDTX-RSNET user manual Panel Description, Front Panel, Back Panel

Panel Description

Front Panel

1

2 3

4

5

7

6

1.HDMI IN Port: Connect HDMI or DVI (with adapter) source here.

2.IR IN Port: Connect included IR receiver to this port.

3.IR OUT Port: Use the included IR Emitter for this port.

4.RS-232 Port: Bidirectional RS-232, send signal to or from a control system or PC.

5.Firmware Update Port: Use Mini USB to USB cable to connect to a Windows computer to update.

6.Yellow Link LED: Signal Indicator for the CAT5e/6/7 OUT port. LED will remain solid, unless there is an issue with the cable or signal, then it will blink.

7.Green Power LED: Power indicator. If plugged in light will remain solid. If LED starts blinking power is intermittent or there is a problem with the cable. If LED is off, no power is passing to the receiver (check your outlet or the power cable).

Back Panel

1

2

3

1.Power Port: Connect included captive screw power adapter here.

2.Ethernet Port: Bi-directional Ethernet, send signal to a display or source from a router.

3.CAT5e/6/7 OUT Port: Connect CAT5e/6/7 cable from here to a compatible receiver. Ex. AT-HDRX-RSNET (recommended)

atlona.com	4	Toll free: 1-877-536-3976
		Local: 1-408-962-0515