Atlona AT-PRO2HD88M user manual Before You Start, Specifications, Remote Control

Before You Start

•Make sure when connecting the CAT5e/6/7 cables a 568B termination method is used.

•Avoid using patch panels and wall plates during initial set up and testing of the matrix switcher.

•Make sure the matrix is connected to a component surge suppressor and line conditioner.

Note: Atlona’s warranty does not cover damage due to electrical disturbances. A component surge suppressor and line conditioner are highly suggested especially in areas with electrical storms.

•Be sure you’re using a mono to mono (2 conductor) 3.5mm IR cable (i.e. AT-MINIMONO6 - available to purchase at Atlona.com) when using IR output control from 3rd party controllers, stereo (3 conductor) 3.5mm cables are not compatible.

Specifications

Bandwidth frequency	6.75 Gbps
Input Ports	8 x HDMI (Female Type)
	9 x IR 3.5mm
	1 x Firmware update
	8 x 3.5mm Stereo Audio
Output Ports	8 x CAT 5e/6/7
	1 x RS-232
	9 x IR 3.5mm
Resolution outputs	Video: up to 1080p@60Hz
	Vesa: up to 1920x1200
Dimensions (HxWxD)	6.93x18.98x14.27 (inch) or 176x482x362.5 (mm)
Weight	21.61lbs or 9.8 kg
Temperature	-4°F to 158°F or -20°C to 70°C
Power consumption	60W
Remote Control
	Output selection. Numbers correspond with the CAT5e/6/7
	category cable outputs on the matrix. The same remote is used
	for the AT-PRO2HD88M as the AT-PRO2HD1616M. For AT-
	PRO2HD88M only 8 I/O buttons will be functional.
	Arrow buttons are not functional for this product.
	Input selection. Numbers correspond with the HDMI inputs on
	the matrix. The same remote is used for the AT-PRO2HD88M as
	the AT-PRO2HD1616M. For AT-PRO2HD88M only 8 I/O buttons
	will be functional.

Toll free: 1-877-536-3976	4	atlona.com
Local: 1-408-962-0515