Panel Description
Front Panel
1 2
6
3 4 5 a b c d
1.IR Receiver Window. Receives the signal from the included IR Remote Control or a 3rd party IR Controller.
2.Power Button. Cycles the power between On (blue backlight) or Standby (red backlight) mode.
3.Function Button. Allows you to select command options. (blue backlight when selected)
a.Default: Mirrors all inputs to corresponding outputs. (i.e. 1 to 1, 2 to 2, 3 to 3, etc.)
b.All: Save a single input to all the outputs with this function.
c.Memory: Save/load the current input and output route to memory.
d.EDID: Save/Load EDIDs to individual inputs.
Note: Default setting for EDID is the highest common HD resolution of all connected devices. (i.e. if you have resolutions ranging 720p, 1080i, and 1080p then 720p would be the default resolution for all connected displays.)
4.Enter Button. Use to view current status for inputs and outputs or to confirm a command.
5.Cancel Button. Within the functions menu use to go back one screen or to the home screen.
Note: You cannot power off or change functions unless you go to the home screen.
6.Number buttons. Use these buttons to select input and output paths or use with the function button to change multiple matrix settings.
atlona.com | 5 | Toll free: |
Local: | ||
|
|