Operating Modes
3-8 AT85DVK-07 Demonstration Firmware User’s Manual
7687C–MP3–09/07
3.2 Player The easiest way to play the Nand Flash disk is to select the player operating mode.
From the main menu, select the player icon, then confirm by pressing the Select key.
The player will automatically start playback of all songs in the Nand Fl ash and M MC (if
present) disks or from the last saved position (file + played time) if file still exists.
If the MP3 file contains ID3 tags, they are automatically displayed.
3.2.1 Player Status The player status can take the following states:
3.2.1.1 Playing Control To toggle Play and Pause mode:
Press the Select key briefly.
To Stop the player:
Press the Select key and keep it pre ssed (long press).
3.2.1.2 Song Selection To skip the current pl ayed song:
Press the Right Key briefly to play to th e next song.
Press the Left Key briefly to skip to the previous song.
3.2.1.3 Fast Forward
Fast Rewind To quickly go forward or backward inside the audio stream:
Press the Right key and keep it pressed to e nter fast forward play mode.
Press the Left key and keep it presse d to enter fast rewind play mode.
3.2.1.4 Repeat AB To setup a repeat AB sequence, perform the following key sequence:
Press the F1 key to set t he A marker
Press the F1 key again t o set the B marker and restart play back to the A marker
Press the F1 key agai n to cancel the repeat sequence
3.2.1.5 Volume Control To increase or decrease the audio volume:
Press the Vol-Up key or Up key to incre ase the volume.
Press the Vol-Down or Down key to decrease the volume.
A pop-up windows appears which gives information on volume level:
File Name
ID3 Song Name
ID3 Singer Name
Stream Type
Index/Total song
Player Status
Play Time
Stream Bit-Rate
in current directory
Play
Pause
Stop
Fast Forward
Fast Rewind
Play A TAG Set
Repeat AB Sequence