OPERATION
• Take the monocular out of the case.
Operation
knob
•Install the battery into the housing with the polarity order as shown on the scope. Battery Type: 1.5 Volt, AA size .
•Rotate the operation knob from “OFF” position to “ON” position to turn the unit on. The protective lens cover still attached to the lens. Do not turn the unit on in the day- time without the protective lens cap on. You should see green glow in the eyepiece.
•Observe the scene and adjust the diopter for optimal image clarity.
•You may now enter a dark environment or simply shut the lights off in order to darken the room.
•Next, remove the lens cap/daylight filter. Adjust the front lens for the distance of the focus. You should not have to readjust the diopter.
•To turn the unit off, rotate the operation knob from “ON” position to “OFF” position.
FOCUSING
To focus the
NOTE: We suggest that you focus the diopter during daylight with the filter on.
Next focus the front lens until the image and the grain are both sharp. When you are in
NOTE: The front lens should be readjusted as you view objects at different distances.
INFRA-RED ILLUMINATOR
Illuminator
To turn the IR on, draw and rotate the operation knob to “IR” position.
It is important to remember that the IR illuminator is simply an infra red light source, and like any light source, it may loose its effectiveness over a great distance.
3