Pioneer VSX-917V manual Using the SR+ mode with a Pioneer plasma display, Other connections

Other connections

10

•Use a 3-ringed miniplug SR+ cable1 to connect the CONTROL IN jack of this receiver with the CONTROL OUT of your plasma display.

Before you can use the extra SR+ features, you need to make a few settings in the receiver. See SR+ Setup for Pioneer plasma displays on page 65 for detailed instructions.

VIDEO	Pioneer plasma	VIDEO
INPUT 1		INPUT 2
	display

DVD player	Satellite receiver, etc
DVD		TV/SAT
AUDIO IN		AUDIO IN
		VSX-917

This receiver

To make the most of the SR+ features, you should connect your source components (DVD player, etc.) in a slightly different way to that described in this chapter. For each component, connect the video output directly to the plasma display, and just connect the audio (analog and/or digital) to this receiver.

Using the SR+ mode with a Pioneer plasma display

When connected using an SR+ cable, a number of features become available to make using this receiver with your Pioneer plasma display even easier. These features include:

•On-screen volume display.

•On-screen display of listening mode.

•Automatic video input switching on the plasma display.

•Automatic volume muting on the plasma

display.2

See also SR+ Setup for Pioneer plasma displays on page 65 for more on setting up the receiver.

RECEIVER	INPUT		SOURCE
	SELECT
AUDIO/VIDEO PRE-PROGRAMMED				SLEEP	SBch	ANALOG
REMOTE CONTROL UNIT						ATT
				SR+	DIMMER	MIDNIGHT
				SIGNALSEL
F.AUDIO				D.ACCESS +10		CLASS DISC
DVD	TV	DVR	TVCTRL			ENTER
CD-R/TAPE	XM RADIO	SIRIUS		TOPMENU		MENU
CD	FM	AM	RECEIVER	TUNE
				DTVMENU ST	ST	T.EDIT

ENTER

1Make sure that the plasma display and this receiver are switched on and that they are connected with the SR+ cable.

See Using this receiver with a Pioneer plasma display above for more on this.

2To switch SR+ mode on/off, press RECEIVER, then the SR+ button.

The front panel display shows SR+ ON or OFF.

English Deutsch Français Italiano Nederlands Español

Note

1• The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Cus- tomer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed mini phone plug for the connection).

•If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma dis- play remote sensor to control the receiver. In this case, you won’t be able to control the receiver using the remote control if you switch the plasma display off.

2 The automatic volume muting feature is enabled separately; see SR+ Setup for Pioneer plasma displays on page 65.

61

En