12Additional information
Problem | Remedy |
The SR cable is connected, but | • Reinsert the SR cable, making sure it’s connected to the right jack (see Using this |
the connected components | receiver with a Pioneer plasma display on page 60). |
can’t be operated with the | • Make sure an analog connection has been made between the units. |
remote. | • This feature only works with Pioneer products. |
|
|
The display is dark or off. | • Press DIMMER on the control repeatedly to return to the default. |
|
|
HDMI
Symptom | Remedy |
No picture or sound. | • If the problem still persists when connecting your HDMI component directly to your |
| monitor, please consult the component or monitor manual or contact the |
| manufacturer for support. |
|
|
No picture. | • Depending in the output settings of the source component, it may be outputting a |
| video format that can’t be displayed. Change the output settings of the source, or |
| connect using the component, |
|
|
OSD does not appear. | • The OSD will not appear if you have connected using the HDMI output to your TV. |
| Use component, |
|
|
No sound, or sound suddenly | • Since the HDMI audio signal is sent through this receiver to your TV, you need to |
ceases. | make separate connections for audio if you want to hear your HDMI component |
| through this system. See Connecting using HDMI on page 57 for more on this. |
| • If you’ve made separate connections for audio, make sure you have assigned the |
| analog/digital jack(s) to the corresponding HDMI input for the component. See |
| Assigning the HDMI inputs on page 63 to do this. |
| • Check the audio output settings of the source component. |
|
|
XM radio messages
Symptom | Cause | Action |
Check Antenna | The XM antenna is not connected. | Check that the XM antenna cable is attached |
|
| securely. |
|
|
|
XM ANT ERR | A | Make sure that there is nothing unusual with the |
| surrounding antenna cable. | antenna or antenna cable. Switch the power off |
|
| then back on again. |
|
|
|
Updating | The radio is being updated with the latest | Wait until the encryption code has been updated. |
| encryption code. | Channels 00 and 01 should function normally. |
|
|
|
No Signal | The XM signal is too weak at the current location. | n/a |
|
|
|
Loading | The receiver is acquiring audio or program | Wait until the information has been received. |
| information. |
|
|
|
|
Off Air | The channel currently selected has stopped | Select another channel. |
| broadcasting. |
|
|
|
|
CH– – – | You have selected a channel that does not exist, | The receiver will automatically switch to channel |
| or that you have not subscribed to. | 001 (or the last selected channel). |
|
|
|
– – – – – – – – | There is no artist name/feature, song/program | No action needed. |
| title, or channel category associated with the |
|
| channel at this time. |
|
|
|
|
68
En