09Controlling the rest of your system
Selecting preset codes directly
RECEIVER | INPUT |
| SOURCE |
|
|
|
|
|
| SELECT |
|
|
|
| SR+ | DIMMER | MIDNIGHT |
|
|
|
|
|
| |||
AUDIO/VIDEO |
|
|
| SIGNALSEL |
|
| ||
REMOTE CONTROL UNIT |
|
|
|
|
|
| ||
|
|
|
| D.ACCESS +10 |
| CLASS DISC | ||
|
|
|
|
|
|
|
| ENTER |
|
|
|
| TOPMENU |
|
| MENU | |
|
|
|
|
|
| TUNE |
|
|
F.AUDIO |
|
|
|
|
|
|
|
|
DVD | TV | DVR | TVCTRL | DTVMENU | ST | ST | T.EDIT | |
|
| ENTER |
| |||||
|
|
|
| SETUP |
| RETURN | ||
|
|
|
|
|
|
| ||
XM RADIO | SIRIUS |
|
|
|
|
|
| |
CD | FM | AM | RECEIVER | GUIDE | CATEGORY TUNE |
|
| |
|
|
|
|
| TV CONTROL |
| ||
| SLEEP | SBch | ANALOG |
|
|
| ||
|
|
|
|
|
| |||
|
|
| ATT |
|
|
|
|
|
|
|
|
| TVVOL | INPUT | TVCH | VOL | |
|
|
|
|
|
| SELECT |
|
|
1While pressing the RECEIVER button, press and hold the SETUP button.
The remote LCD display shows SETUP.
2Use / to select PRESET then press
ENTER.
3Press the MULTI CONTROL button for the component you want to control then press
ENTER.
The LCD on the remote displays the component you want to control.1
4Use / to select the first letter of the brand name of your component then press
ENTER.
This should be the manufacturer’s name (for example, P for Pioneer).
5Use / to select the manufacturer’s name from the list then press ENTER.
6Use / to select the proper code from the list, then try using this remote control with your component.
The code should start with the component type (for example, DVD 009). If there is more than one, start with the first one.
To try out the remote control, switch the component on or off (into standby) by pressing SOURCE . If it doesn’t seem to work, select the next code from the list (if there is one).
Note
1 You can’t assign the RECEIVER button.
7If your component is controlled successfully, press ENTER to confirm. The remote LCD display shows OK.
Erasing one of the remote control button settings
This erases a control assigned to one of the buttons and restores it to the factory default.
1While pressing the RECEIVER button, press and hold the SETUP button.
The remote LCD display shows SETUP.
2Use / to select ERASE then press
ENTER.
3Press the MULTI CONTROL button corresponding to the button setting to be erased then press ENTER.
The LCD on the remote displays the component.
4Press and hold the button to be erased for two seconds.
The LCD display shows OK or NO CODE to confirm the button has been erased.
5Repeat step 4 to erase other buttons.
6Press the RECEIVER button when you’re done.
Erasing all of the remote control presets
This will erase all preset remote control preset codes.
1While pressing the RECEIVER button, press and hold the SETUP button.
The remote LCD display shows SETUP.
2Use / to select RESET then press
ENTER.
48
En