Pioneer VSX-917V manual The System Setup menu, Fine Channel Level, Fine Speaker Distance

The System Setup menu 06

•EQ CUSTOM1/2 Adjust – Make detailed manual adjustments to your custom Acoustic Calibration EQ settings (see Setting the Acoustic Calibration EQ manually on page 39).

•EQ Data Check – Check the ALL CH ADJUST, FRONT ALIGN and custom settings using the on-screen display (see Checking your Acoustic Calibration EQ settings on page 40).

Fine Channel Level

• Default setting: 0dB (all channels)

You can achieve better surround sound by properly adjusting the overall balance of your speaker system. The following setting can help you make detailed adjustments that you may not achieve using the Manual speaker setup on page 40.

1Select ‘Fine Ch Level’ from the Manual MCACC setup menu.

You’ll hear test tones from each speaker in turn. Since the left speaker is the main reference speaker, the level is fixed.

Caution

•The test tones used in the System Setup are output at high volume (the volume increases to –18 dB automatically).

3.Manual		MCACC			3a.Fine	Channel Level
	a.Fine	Ch	Level
	b.Fine SP		Distance		Please Wait . . . 20
	c.EQ	AUTO Setting
	d.EQ	Data	Copy			Caution!
	e.EQ	CUSTOM1		Adjust
	f .EQ	CUSTOM2		Adjust	Loud	test tones
	g.EQ	Data	Check			will be output.
				:Return		:Cancel

2Select each channel in turn and adjust

the levels (+/– 10dB) as necessary.

Use / to adjust the volume of the speaker you selected to match the reference speaker.

When it sounds like both tones are the same volume, press ENTER to confirm and continue to the next channel.

3a.Fine	Channel Level
L	+	0.0dB	(Reference)	English
SW	[	–1.5dB ]
R	[	0.0dB ]
C		+1.0dB
LS	[	–3.0dB ]
RS	[ +10.0dB ]
SBL	[ –10.0dB ]
SBR	[	+9.5dB ]
			:Finish

• For comparison purposes, the reference	Deutsch
speaker will change depending on which
speaker you select.
• If you want to go back and adjust a
channel, simply use / to select it.
3 When you're finished, press RETURN.	Français
You return to the Manual MCACC setup menu.
Fine Speaker Distance

• Default setting: 10.0 ft (all channels)

For proper sound depth and separation with			Italiano
your system, it is necessary to add a slight bit
of delay to some speakers so that all sounds
will arrive at the listening position at the same
time. The following setting can help you make
Manual MCACC setup menu.			Nederlands
detailed adjustments that you may not achieve
using the Manual speaker setup below.
1 Select ‘Fine SP Distance’ from the
The volume increases to the reference level.
	e.EQ	CUSTOM1 Adjust	Español
3.Manual		MCACC
	a.Fine Ch Level
	b.Fine SP Distance
	c.EQ	AUTO Setting
	d.EQ	Data Copy
	f .EQ	CUSTOM2 Adjust
	g.EQ	Data Check

:Return

2Adjust the distance of the left channel from the listening position.

3b.Fine SP Distance

L(Reference)

10.0ft

ENTER:Next :Cancel

After pressing ENTER, test tones will be output.

37

En