05Listening to your system
•DIGITAL – Selects an optical or coaxial digital signal.
When set to DIGITAL or AUTO, 2 DIGITAL lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input.
Selecting the multichannel analog inputs
If you have connected a decoder or a DVD player with multichannel analog outputs to this receiver (page 14), you must select the analog
multichannel inputs for surround sound. 1
1Make sure you have set the playback source to the proper output setting.
For example, you might need to set your DVD player to output multichannel analog audio.
2Press DVD/LD.
3Press SIGNAL SELECT to select the multichannel analog inputs.
DVD 5.1ch shows in the display and the ANALOG indicator lights.
Selecting the front audio inputs
When playing back a component connected to the MCACC/AUDIO IN jack on the front panel, set the source to F.AUDIO on the receiver.
1Press F.AUDIO (SHIFT+DVD) on the remote control.
You can also select the source by pressing VIDEO/FRONT AUDIO on the front panel.
2Playback the connected component.
Note
1• During playback from the multichannel inputs, you can’t use any of the sound features/modes and only the volume and chan- nel levels can be set.
•You can’t listen to your speaker B (Second Zone) system during playback from the multichannel inputs.
34
En
