Pioneer VSX-917V manual SR+ Setup for Pioneer plasma displays, Digital Video Converter Setup

Other Settings 11

3When you're finished, press RETURN. You return to the Other Setup menu.

SR+ Setup for Pioneer plasma displays

Make the following settings if you have connected a Pioneer plasma display to this receiver using an SR+ cable. Note that the number of settings available will depend on the plasma display you’ve connected.

See also Using this receiver with a Pioneer plasma display on page 60.

1 Select ‘SR+ Setup’ from the Other Setup menu.

6.Other Setup			6d.SR+ Setup
	a.DRC	Setup	PDP Volume	Control
	b.Dual	Mono Setup			OFF
	c.LFE	ATT Setup	PDP Input Select
	d.SR+	Setup	DVD/LD	[ input–1 ]
	e.DVC	Setup	TV/SAT	[ input–2 ]
			DVR	[ input–3 ]
			VIDEO	[	TV	]
			Monitor Out	Connect
				[	OFF	]
		:Return				:Finish

2Select the ‘PDP Volume Control’ setting you want.

•OFF – The receiver does not control the volume of the plasma display

•ON – When the receiver is switched to one of the inputs that use the plasma display (DVD/LD, or another function below), the volume on the plasma display is muted so only sound from the receiver is heard.

3Assign any input source connected to the plasma display to the corresponding input number.

This matches the receiver’s input source with a numbered video input on the plasma display. For example, assign DVD/LD to input-2if you have connected your DVD video output to video input 2 on the plasma display.

•The Monitor Out Connect should be set to the input that you’ve used to connect this receiver to your plasma display.

6d.SR+ Setup					6d.SR+ Setup
PDP Volume	Control				PDP Volume	Control
	[ ON ]					[ ON ]
PDP Input Select					PDP Input Select
DVD/LD		input–1			DVD/LD		input–2
TV/SAT	[	input–2		]	TV/SAT	[	OFF		]
DVR	[ input–3 ]				DVR	[ input–3 ]
VIDEO	[	TV	]		VIDEO	[	TV	]
Monitor Out	Connect				Monitor Out	Connect
	[	OFF	]			[	OFF	]
			:Finish					:Finish

4When you're finished, press RETURN. You return to the Other Setup menu.

Digital Video Converter Setup

• Default setting: ON

The video converter allows you to see analog video sources through all of this receiver’s MONITOR VIDEO OUT jacks. Note that the converter gives priority to component, S-video, then composite (in that order). See About the video converter on page 12 for more on this.

1Select ‘DVC Setup’ from the Other Setup menu.

6.Other Setup			6e. DVC Setup
	a.DRC	Setup
	b.Dual	Mono Setup	DVC
	c.LFE	ATT Setup		ON
	d.SR+	Setup
	e.DVC	Setup
		:Return		:Finish

2Choose the setting that you want.

•ON – All analog video signals are output from the MONITOR VIDEO OUT jacks.

•OFF – No conversion between video formats.

3When you're finished, press RETURN. You return to the Other Setup menu.

English Deutsch Français Italiano Nederlands Español

65

En