4
Camera adapterYour Viper
Set screws
Video or 35mm
Camera
• You may need to focus the 35mm camera or video camer a in combination with the Vip er in
order to get the sharpest possible image.
• We suggest that you find an open sp ace to work in. Focus the Vipe r so that the scene is at
its sharpest. For best results you shoul d disable the auto focus (if any) on either the 3 5mm
camera or the vid eo camera and m anually focus the 35mm camera or the video cam era.
Once the image is sharp, then simply adjust the Viper’s front lens to change the focus.
• An important part to remember is that you are not taking a picture of an object that is far away
from you, but you are actually taking a picture of the phosphorous screen of the Viper that is
only 2-3 inches away.
HEADGEAR
PART I
1) The first step that you want to take in mount-
ing your VIPER on your head is to fit the head-
gear to your size. Adju st the headgear fist
befor attaching the VIPER to it.
2) Loosen all the strap s and plase the head-
gear on your head.
3) You will want to tighten the side straps
(Figure H1) fist.
4) Then secure the top strep (Figure H2).
This one is rather ti ght so you might nee d
to remove it from your head, when you are
adjusting the strap.
5) And last you will want t o adjust your chin
strap (Figure H3).
PART II
Now you are ready to mount the VIPER on to your headgear.
1) Remove the already adjausted headgear from your head.
2) Slide the VIPER on to the rail (Figure H4). Loo sen the tightening
knob (on the rail) to enable you to easily slide
the unit on. Don’t retighten the knob just yet.
3) Adjust the vertical position of the VIPER to
your comfort and tighten the vertic al tigten-
ing screw (Figure H5, #1) and tighten vertical
fixator (Figure H5,#2).
4) To adjust horizontally you may use the vertic al tightening screw
(Figure H5, #1).
Figure H1
Figure H2
Figure H3
Figure H4
Figure H5
2
1