ATON A83C 11 Mounting Speaker In Ceiling, Storm Series LCR Theater Speakers, All rights reserved

Storm Series LCR Theater Speakers

Mounting Speakers in Ceiling (Pre-Construction or Retro-Fit)

1.Remove speaker grille and place speaker face down.

2.Locate the speaker wire and pull through the ceiling opening.

3.Connect the speaker wire. BE SURE TO OBSERVE CORRECT POLARITY!

4.Insert the speaker into the opening in the ceiling (or Rough-in Bracket opening) and care- fully tighten each of the four clamping screws, alternating diagonally between each screw position to ensure proper fi t.

5.Once the speaker is mounted in the ceiling, twist the baffl e to aim the mid-range driver at the listening area. See Pointing the Mid-Rangefor details.

6.Aim the pivoting tweeter at the listening area.

7.Set the Treble and Bass switches. See Setting Switches for details.

8.Replace the speaker grille.

Figure 3.11: Mounting Speaker In Ceiling

10 ©2007 • All rights reserved.