Storm Series LCR Theater Speakers
Mounting Speakers in Wall
1.Remove speaker grille and place speaker face down.
2.Locate the speaker wire and pull through the wall opening.
3.Connect the speaker wire. BE SURE TO OBSERVE CORRECT POLARITY!
4.Insert the speaker into the opening in the wall (or
5.Aim the pivoting tweeter at the listening area.
7.Set the Treble and Bass switches. See Setting Switches for details.
8.Replace the speaker grille.
Figure 3.13: Mounting Speaker In Wall
Setting Switches
Once the speakers are wired, mounted, and positioned correctly, use the Bass and Treble switches to fi
floors, thick draperies, etc. Select the “+” position to increase Bass/Treble response or select the
BASS TREBLE
Figure 3.14: Bass & Treble Switches
12 | ©2007 • All rights reserved. |