ATTO Technology 1180D Fibre Channel and Scsi, Environmental and Physical Characteristics, Other

ATTO FibreBridge™ 1180D

Fibre Channel and SCSI

Fibre Channel Interface:

•1-Gigabit (200 MB/sec. in full-duplex mode)

•One (1) copper DB9 port

•Full support for direct connect to

F-port fabric switches

•Class 2, Class 3 ANSI Fibre Channel specifications

•PLDA, public loop login (NL_ports) and fabric direct connect (N_port)

•Full-duplex transmissions

SCSI Interface:

•One (1) 68-pin SCSI connector

•LVD Ultra2 SCSI - 80 MB/sec. max.

•Backward compatible with all Single- Ended SCSI devices

•128 LUNs per channel

Performance:

•Up to 3,500 I/Os per sec.

•80 MB/sec. maximum data-transfer rate

•Up to 72 MB/sec. sustained

data-transfer rate

Environmental and Physical

Characteristics

Dimensions:	Configuration:
• 7.50” W	• Desktop
• 10.00” L	Airflow:
• 2.03” H
	• Internal fan provides 10 CFM
Operating Environment:	• Ambient air not to exceed 40º C
• Temperature: 0 - 40º C
• Humidity: 0-90% non-condensing	Other
Power:	Operating Systems Supported:
	• Operating system independent
• Input: 100/240 VAC (automatic)
• Rated: 90 – 132 VAC; 175 – 264 VAC,	Agency Certifications:
47 – 63 Hz, single phase
	• FCC Class A
	• CE (EN55022/EN55024)
	• CSA / EN60950

Fibre Channel Compliance:

•ANSI FC-AL

•SNIA Extended Copy

•Class 2, Class 3

Management

Device Management Physical Interface:

•In-band (through Fibre Channel)

•Serial through RS-232 port

Device Management User Interface:

•Command Line Interface (CLI)

•ATTO BridgeTools™ Java-based application

LEDs:

•Power

•Ready

•FC activity

•SCSI bus activity

		Figure 1: Rear Panel
￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿￿			￿￿￿￿￿￿￿￿￿￿￿￿￿
￿￿￿￿￿￿￿￿￿	￿￿￿	￿	￿￿￿		￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿
			￿￿￿￿	￿￿￿￿

F i b r e C h a n n e l

©2005 ATTO Technology, Inc. Specifications subject to change without notice. Rev 9/05