Caring for your Atwood Battery Powered CO Alarm

To keep your CO alarm in good working order, please follow these simple steps:

•Verify unit alarm, lights and battery operation by pushing the test button once a week.

•Vacuum the CO alarm cover with a soft brush attachment once a month to remove accumulated dust.

•Instruct children never to play with the CO alarm. Warn children of the dangers of carbon monoxide poisoning.

•Never use detergents or other solvents to clean the CO alarm.

•Avoid spraying air fresheners, hair spray, paint or other aerosols near the CO alarm.

•Do not paint the CO alarm. Paint will seal the vents and interfere with the sensor ability to detect CO.

•Do not place near a diaper pail..

•TEST ALARM OPERATION AFTER VEHICLE HAS BEEN IN STORAGE, BEFORE EACH TRIP, AND AT LEAST ONCE PER WEEK DURING USE.

20

.SERVICE

 

EN EST DÉTECTEUR LE QUAND SEMAINE PAR FOIS

 

UNE MOINS AU ET VOYAGE, CHAQUE AVANT VÉHICULE,

•

LE ENTREPOSÉ AVOIR APRÈS L'ALARME TESTEZ

.sales couches à

•

seau d’un proximité à CO de l’alarme pas N’installez

.capteur le par CO du détection la

 

cher-empê donc et l’air de passage de orifices les obstruer

•

pourrait peinture La .CO de l’alarme peindre pas Ne

.CO de l’alarme de près ).etc peinture,

•

cheveux, à (laque aérosol en produits des d’utiliser Évitez

.l’alarme nettoyer

•

pour solvants de ou détergents de jamais N’utilisez

.carbone de

 

monoxyde le par l’asphyxie de dangers des enfants les

•

Avertissez .l’alarme avec jouer pas ne de enfants aux Dites

.aspirateur votre de souple

 

brosse la Utilisez .accumulée poussière la retirer pour mois

•

par fois une l’alarme de l’extérieur sur l’aspirateur Passez

.test bouton le sur appuyant en semaine par fois

•

une l’alarme de piles les et lumières les l’alarme, Vérifiez

:précautions simples ces suivre devez vous marche, de état bon en CO de alarme votre conserver Pour

20

pile sur fonctionnement CO de alarme Atwood votre de soin prendre Comment

Page 19 Page 21
Page 20
Image 20
Atwood Mobile Products KN-COPP-B manual Caring for your Atwood Battery Powered CO Alarm, Do not place near a diaper pail
Page 19 Page 21

KN-COPP-B specifications

The Atwood Mobile Products KN-COPP-B is a state-of-the-art carbon monoxide (CO) and propane gas detector designed specifically for recreational vehicles (RVs), campers, and other mobile environments. This device is essential for ensuring the safety of occupants by providing early warning signals when dangerous levels of carbon monoxide or propane gas are detected.

One of the standout features of the KN-COPP-B is its dual-sensor technology. This innovative system combines the detection capabilities for both carbon monoxide and propane, allowing it to monitor air quality continuously and offer protection from two potentially life-threatening gases. The detector uses advanced electrochemical sensors for CO detection, which are known for their reliability and accuracy.

The KN-COPP-B is designed for easy installation. It comes with a compact, lightweight design that fits seamlessly into any RV or camper setup. The detector can be mounted easily on walls or ceilings and operates on 12V power, making it compatible with the electrical systems found in most mobile vehicles.

This device also boasts a user-friendly interface. It features an intuitive LED indicator that provides status updates at a glance. When CO or propane is detected, the alarm will emit a loud alert, ensuring that occupants are immediately aware of any dangerous conditions. Additionally, the device includes a test/reset button, allowing users to verify that the detector is operational.

Durability is another significant characteristic of the Atwood KN-COPP-B. It is designed to withstand the rigors of mobile life and perform reliably in various environmental conditions. Whether faced with temperature fluctuations or vibrations from traveling, this detector continues to operate effectively.

With safety as a top priority in recreational vehicle usage, the Atwood Mobile Products KN-COPP-B delivers peace of mind for travelers. It meets stringent safety standards and complies with both UL and CSA certifications, ensuring its efficacy and reliability.

In summary, the Atwood Mobile Products KN-COPP-B stands out for its dual-sensor technology, ease of installation, robust design, and clear user interface. By integrating advanced detection for carbon monoxide and propane, this detector significantly enhances safety for anyone enjoying the open road or the great outdoors, making it an essential device for RV owners and camping enthusiasts alike.
Top Page Image Contents