16OPERATION AND ADJUSTMENT INSTRUCTIONS

Mid-Stop Limit Setup

This features provides a timing function to stop a door as it is traveling open at a Mid Stop position instead of the full open position. The door can then be moved to the full open position if desired by pressing the Open button. A single button input when the door is at the mid stop position will cause the door to begin moving in the close direction. The factory default is not set; the minimum run time to mid-stop limit is 6 seconds. After moving the door to the close position and temporarily setting the switches to the appropriate settings in the table, pressing STOP will remove the mid-stop limit setting. Pressing OPEN will start the door open. When the door reaches the desired mid-stop position, press STOP.

Changing the dip-switch setting to any other setting will save the mid-stop limit position. Return the dip switches to the originally set Operating Mode setting (see section previous). Note: The door must move a sufficient distance to fully disengage the Reverse Cutout Limit nut from the Reverse Cutout Limit switch to set the mid-stop limit.

Auto Close Timer Setup

This feature allows for a modification of the amount of time between the door reaching either the Mid Stop or the Full Open position and automatically starting in the close direction. The Auto Close feature is only active when the operator is set to the T or TS Operating Mode (see section previous). The factory default is 30 seconds; the minimum time is 5 seconds; the maximum time is 5 minutes.

After moving the door to the close position and temporarily setting the switches to the appropriate settings in the table, pressing STOP will clear and turn off the auto close timer. Every time OPEN is pressed, 5 seconds is added to the time. Changing the dip-switch settings to any other settings will save the new time. Return the dip switches to the originally set Operating Mode setting (see section previous).

Maximum Run Time Setup

This feature provides for a maximum amount of time the motor will be energized after an input is recognized. The factory default time is 30 seconds; the maximum time is 60 seconds. After moving the door to the close position and temporarily setting the switches to the appropriate settings in the table, pressing STOP will reset the time to the factory default setting. Pressing OPEN will start the door open. The run time will be recorded when the door reaches the open limit. To prevent nuisance problems, 0.75 seconds are added to this time. Pressing stop before the door reaches the open limit will stop the door and reset the time to the factory default.

Changing the dip-switch setting to any other setting will save the new time. Return the dip switches to the originally set Operating Mode setting (see section previous).

BRAKE ADJUSTMENT

The solenoid operated brake may require occasional adjustment. Adjustment is necessary if door tends to drift downward after reaching the open limit. Follow the instructions below and use Figure 21 as a guide.

(1) Loosen shoe adjusting screw and bottom bracket arm of solenoid.

(2) Move tab until drum has a slight drag.

(3) Reverse drag slightly from tab and tighten shoe adjustment screw.

107103

Figure 21

Page 15 Page 17
Page 16
Image 16
Audi AUD-S owner manual Brake Adjustment, Mid-Stop Limit Setup
Page 15 Page 17

AUD-S specifications

The Audi AUD-S is a striking representation of the brand's commitment to performance, luxury, and cutting-edge technology. Tailored for enthusiast drivers who crave a high-performance vehicle without sacrificing daily usability, the AUD-S harmonizes style and function in a captivating package.

One of the standout features of the AUD-S is its robust powertrain. Typically powered by a turbocharged V6 or V8 engine, the AUD-S is engineered to deliver exhilarating performance that pushes the boundaries of what drivers expect from a luxury sedan. With power output often exceeding 400 horsepower, the AUD-S can accelerate from 0 to 60 mph in a matter of seconds, offering a thrilling driving experience both on the track and the open road.

The AUD-S employs Audi's renowned quattro all-wheel-drive system, which enhances traction and stability in various driving conditions. This advanced system ensures that power is efficiently distributed to all four wheels, providing superior grip during acceleration and cornering, making the AUD-S a driver-focused vehicle that inspires confidence behind the wheel.

In terms of design, the AUD-S boasts an aggressive stance complemented by sleek lines and distinctive aerodynamic enhancements. Its bold front grille and sharp LED headlights not only contribute to its eye-catching appearance but also improve airflow and overall performance. The spacious interior is adorned with high-quality materials, including leather upholstery and aluminum or carbon fiber accents, providing an atmosphere of sophistication and luxury.

Technology in the AUD-S is state-of-the-art, featuring the latest version of Audi’s MMI infotainment system. The system provides intuitive controls for navigation, audio settings, and vehicle monitoring, ensuring that drivers stay connected while remaining focused on the road. A fully digital instrument cluster, known as the Virtual Cockpit, presents vital information in a crisp and customizable format.

Safety and driver assistance features are also a priority in the AUD-S. Equipped with various sensors and cutting-edge camera technology, the vehicle offers features such as adaptive cruise control, lane-keeping assist, and parking assistance, all designed to enhance safety and convenience behind the wheel.

In summary, the Audi AUD-S embodies the perfect blend of power, luxury, and technology. With its impressive performance capabilities, sophisticated design, and advanced features, the AUD-S stands out as a top contender in the high-performance luxury sedan market, offering an unparalleled driving experience for those who seek both excitement and elegance.
Top Page Image Contents