Audio-Technica AT2010 manual Specifications

	311
	AT2010
Specifications
Element	Fixed-charge back plate, permanently
	polarized condenser
Polar pattern	Cardioid
Frequency response	40-20,000 Hz
Open circuit sensitivity	–48 dB (3.9 mV) re 1V at 1 Pa
Impedance	100 ohms
Maximum input sound level	136 dB SPL, 1 kHz at 1% T.H.D.
Dynamic range (typical)	113 dB, 1 kHz at Max SPL
Signal-to-noise ratio1	71 dB, 1 kHz at 1 Pa
Phantom power requirements	48V DC, 2 mA typical
Weight	233 g (8.2 oz)
Dimensions	179.1 mm (7.05") long,
	50.8 mm (2.00") head diameter
Output connector	Integral 3-pin XLRM-type
Audio-Technica case style	T7
Accessories furnished	AT8470 Quiet-FlexTMstand clamp for
	5/8"-27 threaded stands; 5/8"-27 to 3/8"-16
	threaded adapter; soft protective pouch

In the interest of standards development, A.T.U.S. offers full details on its test methods to other industry professionals on request.

1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

1Typical, A-weighted, using Audio Precision System One. Specifications are subject to change without notice.

frequency response: 40 –20,000 Hz

50	100	200	500	1k	2k	5k	10k	20k
			Frequency in Hertz
LEGEND		12" or more on axis

polar pattern

330˚	0˚
	30˚
300˚	60˚
270˚	90˚
240˚	120˚
		LEGEND
210˚	150˚	200 Hz
		1 kHz
	180˚
		5 kHz
SCALE IS 5 DECIBELS PER DIVISION
		8 kHz

10 dB

Response in dB

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com	0001-0143-01