8

ATW-R1820 Dual-channel Receiver Batteries

Battery Selection Each ATW-R1820dual-channel receiver uses six 1.5V AA batteries, not included. Alkaline type is recommended. Always replace all batteries. Make certain the receiver power is Off before replacing batteries. Note: The ATW-R1820 receiver also functions without batteries if connected to an external power supply (12V DC source, 500 mA nominal current, not included).

Battery Installation 1. Open the battery compartment door by pushing the catch back.

2.Observe correct polarity as marked and carefully insert six fresh 1.5V AA alkaline batteries (see above).

3.Replace the door, making certain the latch clicks securely in place.

Battery Condition Indicator

a b

After the batteries are installed, turn the power on by moving the Power Switch to either the 1 or Both position. The small red power-on LED(s) (see a at left ) should light (red light at 1 if Power Switch is in position 1; red light at 1 and 2 if Power Switch is in Both position) and the LCD window should come on. If this does not happen, the batteries are installed incorrectly or they are depleted.

The receiver’s “fuel gauge” battery indicator (see b at left ) displays a maximum of four bar segments. When LCD flashes “LOW.BAT”, the batteries should be replaced immediately to ensure continued operation. Note: Battery indicator is only visible in the “Hold” position.

Operating the Receiver

NOTE: Receiver Channel 1 and Receiver Channel 2 must be set to different frequencies to

avoid interference. Transmitter-Receiver pairs must be set to identical frequencies: set Transmitter 1 to the same frequency as Receiver Channel 1; set Transmitter 2 to the same frequency as Receiver Channel 2.

Selecting Frequencies Overview…

on your Receiver 1. Turn the power on by moving the Power Switch to either the 1 position (for single-channel operation) or Both position (for dual- channel operation).

2. Switch the Dual-channel Control Switch to 1 (to set frequency for Receiver Channel 1) or 2 (to set frequency for Receiver Channel 2). Audio output is muted for the channel that is selected.

3. Press the Set button to enter the Frequency Selection Menu mode; the word “MENU” will appear.

4. Use the Up/Down arrows to cycle through functions: - first arrow up is Manual Frequency Selection mode; - second arrow up is Automatic Scan Group 1;

- third arrow up is Automatic Scan Group 2; - fourth arrow up is Automatic Scan Group 3;

- fifth arrow up is Quit, allowing exit from Menu mode.

Dual-channel Operation First…

(using two transmitters) Turn the power on by moving the Power Switch to Both (for dual-channel operation). To set Setting Receiver Frequency Manually frequency for Receiver Channel 1, switch Dual-channel Control Switch to 1 (left position).

1. Press Set button. The word “MENU” will appear. Press Up arrow to show current frequency. Press Set button and frequency will begin to flash; then use up and down arrows to adjust the frequency. Frequency changes in 25 kHz steps. To increase scroll speed, hold the Up or Down arrow for more than 4 seconds.

2. When you arrive at desired frequency, press and hold the Set button until the word “STORED” appears. Frequency is now set.

Page 8
Image 8
Audio-Technica p51857_1800 manual ATW-R1820 Dual-channel Receiver Batteries, Operating the Receiver

p51857_1800 specifications

The Audio-Technica P51857_1800 is a versatile and high-performance microphone designed to meet the needs of performers and sound engineers alike. Part of Audio-Technica's acclaimed lineup, this model stands out for its exceptional sound quality and robust build, making it a top choice for live performances, studio recordings, and broadcasting applications.

One of the main features of the P51857_1800 is its dynamic microphone design. This construction affords the microphone superior durability, allowing it to withstand the rigors of live performances. Dynamic microphones are renowned for their ability to handle high sound pressure levels without distortion, making the P51857_1800 particularly well-suited for loud environments, such as concerts and public speaking events.

The P51857_1800 utilizes a cardioid pickup pattern, which is essential for focusing on the sound source directly in front of the microphone while minimizing background noise from the sides and rear. This feature ensures that the microphone captures vocals and instruments with clarity and precision, making it an excellent choice for vocalists and instrumentalists alike. The cardioid pattern also helps in reducing feedback during live performances.

In terms of technology, the Audio-Technica P51857_1800 is equipped with a frequency response range that enhances its performance across various sound frequencies. This broad frequency response allows for accurate reproduction of audio, whether it's the subtle nuances of a vocalist's voice or the dynamic range of a musical instrument. The microphone's ability to maintain fidelity at both low and high frequencies is a testament to its advanced engineering.

Additionally, the P51857_1800 features a rugged steel construction that provides not only durability but also a degree of resistance to mechanical wear and tear. The microphone's design incorporates a protective grille that shields the internal components from plosives and moisture, ensuring that the microphone remains functional even in challenging conditions.

Moreover, this model is lightweight and easy to handle, making it convenient for on-stage use. Its compatibility with standard microphone stands and easy-to-use connectivity options allow for quick setup and adjustments during performances.

In summary, the Audio-Technica P51857_1800 is a dynamic microphone that offers a blend of high sound quality, durability, and advanced technology. Featuring a cardioid pickup pattern, a broad frequency response range, and a robust design, it serves as an ideal tool for artists and sound engineers looking to achieve professional-quality audio in live and studio settings. Whether it’s for vocals, instruments, or broadcasting, the P51857_1800 delivers performance that can be relied upon in any scenario.