11

ATW-T1801 UniPakBody-pack & ATW-T1802 Plug-on Transmitter Controls

1

2

4

3

5

6

7

9

POWER MUTE

SET

ATW-T1801 UHF TRANSMITTER

1210

8

7

11

8

11

SET

POWER/MUTE

3

2

6

The ATW-T1801 UniPakbody-pack transmitter includes a field-replaceable flexible antenna. For

1

Antenna

best results, allow the antenna to hang freely and full length from the bottom of the transmitter.

 

 

If the received signal is marginal, experiment with different transmitter positions or try reposi-

 

 

tioning the receiver. Since the transmitter antenna simply screws in, check to make certain it is

 

 

snugly attached (finger-tight).Do not change the length of the transmitting antenna.

 

 

 

 

 

Green light indicates power is on and un-muted; red light indicates that audio is muted.

2

Power-on LED

The light will blink when the batteries are low.

 

 

 

 

 

Liquid Crystal Display presents setup and operating information. The LCD in the transmitters is

3

LCD

designed for greatest contrast and best viewing with the window rotated somewhat away from

 

 

the viewer (about 30 degrees), not straight-on, for a more convenient holding/viewing

 

 

position. The display is illuminated with a backlight when you press Set to access transmitter

 

 

functions. The backlight will automatically turn off within a set period of time.

 

 

 

 

 

Connect an audio input device (microphone or guitar cable) to the audio input jack on the bottom

4

Audio Input Jack

of the ATW-T1801 UniPakBody-pack Transmitter. A number of Audio-Technica professional

 

 

microphones and cables are available separately, pre-terminated with a compatible input

 

 

connector (see page 14 ). The cable connector latches automatically when inserted into the

 

 

transmitter jack. To unlatch and remove the connector, pull up on the connector’s knurled

 

 

metal collar.

 

 

The ATW-T1802 plug-on transmitter has a 3-pin XLRF-type input connector with a locking collar. Use either a dynamic or a condenser microphone. The transmitter provides power to condenser microphones rated to operate on 12V phantom power or less. To attach the microphone, rotate the threaded locking collar fully clockwise (“down”) until it reaches the transmitter housing (see a at right ). Press the microphone and transmitter together (see b at right ). Rotate the thread- ed collar “up” until it is firmly against the end of the mic (see c at right ). Make certain the mic is securely attached before use. To detach the microphone, reverse the steps above. Always loosen the threaded collar fully before attempting to disconnect the mic.

5Microphone Input

a b c

For on/off and mute functions.

6

Power/Mute Button

 

 

 

Press Up or Down arrows, in conjunction with the Set button, to choose operating frequencies

7

Up/Down Arrows

and access transmitter functions.

 

 

 

 

 

Use in conjunction with the Up/Down arrows, to choose operating frequencies and access

8

Set Button

transmitter functions.

 

 

 

 

 

This 3-position sliding cover on the body-pack transmitter’s control panel prevents accidental

9

Sliding Control Cover

shut-off or channel-switching.

 

(3-position)

 

 

 

This sliding cover on the plug-on transmitter’s control panel helps to prevent accidental shut-off

10

Sliding Control Cover

or channel-switching.

 

 

 

 

 

Open by sliding the catch down (on body-pack) or pushing in direction of arrow (on plug-on transmitter).

11

Battery Door

 

 

 

The ATW-T1801 UniPaktransmitter’s mounting clip may be installed with the case positioned

12

Mounting Clip

either “up” or “down,” depending upon which is preferred for the application. To turn the clip

 

 

around, spring the ends of the clip out of the two holes on the sides of the transmitter case and reinstall it facing in the opposite direction.

Page 11
Image 11
Audio-Technica p51857_1800 manual Antenna, Power-on LED, Audio Input Jack, Microphone Input, Power/Mute Button, Set Button

p51857_1800 specifications

The Audio-Technica P51857_1800 is a versatile and high-performance microphone designed to meet the needs of performers and sound engineers alike. Part of Audio-Technica's acclaimed lineup, this model stands out for its exceptional sound quality and robust build, making it a top choice for live performances, studio recordings, and broadcasting applications.

One of the main features of the P51857_1800 is its dynamic microphone design. This construction affords the microphone superior durability, allowing it to withstand the rigors of live performances. Dynamic microphones are renowned for their ability to handle high sound pressure levels without distortion, making the P51857_1800 particularly well-suited for loud environments, such as concerts and public speaking events.

The P51857_1800 utilizes a cardioid pickup pattern, which is essential for focusing on the sound source directly in front of the microphone while minimizing background noise from the sides and rear. This feature ensures that the microphone captures vocals and instruments with clarity and precision, making it an excellent choice for vocalists and instrumentalists alike. The cardioid pattern also helps in reducing feedback during live performances.

In terms of technology, the Audio-Technica P51857_1800 is equipped with a frequency response range that enhances its performance across various sound frequencies. This broad frequency response allows for accurate reproduction of audio, whether it's the subtle nuances of a vocalist's voice or the dynamic range of a musical instrument. The microphone's ability to maintain fidelity at both low and high frequencies is a testament to its advanced engineering.

Additionally, the P51857_1800 features a rugged steel construction that provides not only durability but also a degree of resistance to mechanical wear and tear. The microphone's design incorporates a protective grille that shields the internal components from plosives and moisture, ensuring that the microphone remains functional even in challenging conditions.

Moreover, this model is lightweight and easy to handle, making it convenient for on-stage use. Its compatibility with standard microphone stands and easy-to-use connectivity options allow for quick setup and adjustments during performances.

In summary, the Audio-Technica P51857_1800 is a dynamic microphone that offers a blend of high sound quality, durability, and advanced technology. Featuring a cardioid pickup pattern, a broad frequency response range, and a robust design, it serves as an ideal tool for artists and sound engineers looking to achieve professional-quality audio in live and studio settings. Whether it’s for vocals, instruments, or broadcasting, the P51857_1800 delivers performance that can be relied upon in any scenario.