Optional System Accessories

WIRELESS ESSENTIALSMICROPHONES AND CABLES

All Wireless Essentials accessories are terminated for use with ATW-T1600 and other UniPaktransmitters.

 

AT829cW

Miniature cardioid condenser lavalier microphone.

 

 

Includes clothing clip and windscreen.

 

MT830cW

Subminiature omnidirectional condenser lavalier

 

 

microphone. Includes clothing clip and windscreen.

 

MT830cW-TH

“Theatre” model, same as MT830cW except beige colour

 

 

mic and cable for concealment.

 

 

 

AT831cW

Miniature cardioid condenser lavalier microphone.

 

 

Includes clothing clip and windscreen.

 

AT851cW

Surface-mount wide-range semi-cardioid condenser

 

 

microphone.

 

 

 

AT857AMLcW

19" gooseneck cardioid microphone.

 

 

Mounts to 5/8"-27 thread. Includes windscreen.

 

 

 

AT889cW

Headworn noise-cancelling condenser microphone.

 

 

Includes windscreen and cable clip.

 

ATM35cW

Cardioid condenser instrument microphone.

 

 

Includes AT8418 clip-on instrument mount.

 

ATM73cW

Headworn cardioid condenser microphone.

 

 

Includes windscreen.

 

 

 

ATM75cW

Headworn cardioid condenser microphone.

 

 

Includes windscreen.

 

PRO 8HEcW

Headworn hypercardioid dynamic microphone.

 

 

Includes windscreen and cable clip.

 

 

 

PRO 35xcW

Cardioid condenser instrument microphone.

 

 

Includes AT8418 clip-on instrument mount.

 

AT8319

Hi-Z instrument/guitar cable with 1/4" phone plug.

 

 

AT8317

Connecting cable for UniPak transmitter with an XLRF-type

 

 

input connector, for Lo-Z microphones with XLRM-type

 

 

output terminations.

RECEIVER ACCESSORIES

AT8616

Joining-plate kit allows rack-mounting two ATW-R160

 

 

receivers side-by-side in a single (1U) 19" rack space.

 

 

 

ATW-A20

Pair of UHF ground-plane antennas with 5/8"-27 thread for

 

 

mounting to microphone stands, etc. For use with

 

 

ATW-R160 receivers. Takes RF cables with BNC

 

 

connectors, not included; see RF Cables below.

ATW-A49

Pair of UHF wide-band directional LPDA (log periodic dipole

 

 

array) antennas provide enhanced signal pickup for UHF

 

 

wireless systems throughout a wide band range

 

 

(440-900 MHz). Each antenna paddle is matched to

 

 

50 ohms impedance with and integral hi-quality low -loss

 

 

BNC connector, 6dB gain. For permanent or temporary

 

 

installation; mounts to 5/8"-27 threads.

AEW-DA800EU UHF ( DA800: 795-820, DA860: 840-865 MHz) active AEW-DA860UK unity-gain antenna distribution system provides two

“1-in, 4-out” RF channels; connects a pair of antennas to as many as four diversity receivers. A cascade ouput is provided as a directional coupler to drive additional distribution amps. Includes four DC interconnect cables to power up to four receivers, eight RF output cables and two rack-mount adapters. Mounts in a single (1U) 19" rack space. For use with ATW-R160 EX (ATW-DA800) and ATW-R160 UK (AEW-DA860) receivers.

ATW-RA1

Rack-mount antenna kit brings antenna inputs to the front of

 

receiver for ease of setup, or when receiver is enclosed in a

 

metal rack. Includes a pair of extendable antennas. NOTE:

 

Two adapter kits are required when mounting two receivers

 

side-by-side in a single 19" rack space.

RF Cables

Low-loss design, 50 ohm impedance, with BNC-to-BNC

 

connectors:

 

 

AC12

RG58-type cable (12')

 

AC25

RG8-type cable (25')

 

AC50

RG8-type cable (50')

 

AC100

RG8-type cable (100')

TRANSMITTER ACCESSORIES

 

 

AT8114

Foam windscreen for handheld transmitter.

 

 

AT8141

Water-resistant pouch for UniPak transmitter.

AT8390

Shielded audio cable with 1/4" to 1/4" phone plugs.

 

Available in a variety of lengths.

 

(Also available with one straight and one 90° phone plug

 

as the AT8316.)

AT8456a

Stand clamp for handheld transmitter, 5/8"-27 threads.

 

 

 

9

Page 9
Image 9
Audio-Technica uhf wireless systems manual Optional System Accessories, Wireless Essentials Microphones and Cables