Audio2000's AKJ780D manual Dolby Digital Setup

- - Audio Setup Page - -

DVD System Setup Menu

1. SPEAKER SETUP

Opens up the Speaker Setup page 1.1 DOWNMIX

GeneralAudioDolbyVideo Preference

￿LT/RT - Sound output is divided with the Left coming

out of the Left speaker and the Right coming out of the		Speaker Setup
		S p d i f S e t u p
Right speaker.
		CH EQ Setup
￿ STEREO - Sound output is in Stereo Mode.
		3D Process
￿ V SURR - Virtual Surround Sound
￿5.1 CH - For 5.1 Channel surround sound
1.2 FRONT SPEAKER
Set this based on the size of your front speaker
1.3 CENTER SPEAKER
￿ Set this based on the size of	your front speaker
￿ OFF: If you do not have a center speaker
1.4 REAR SPEAKER
￿ Set this based on the size of	your rear speaker

￿ OFF: If you do not have a rear speaker(s) 1.5 SUBWOOFER

￿ON: If you have a subwoofer

￿OFF: If you do not have a subwoofer

2.SPDIF SETUP

￿SPDIF OFF: No digital audio output

￿SPDIF/ RAW: Digital audio output in RAW format. Normally used for DTS and Dolby Digital 5.1 signals

￿SPDIF/ PCM: Digital audio output in PCM format. Normally used for audio CD signal

3.CH EQ SETUP

￿EQ Type Choose the EQ type that is most similar to the kind of music you are playing

4.3D PROCESS

4.1 PRO LOGIC II

￿Turn PRO LOGIC II surround sound on and off. When it is turned on, more options are available

4.2 REVERB MODE

￿Select a specific reverb sound or turn reverb off

Dolby Digital Setup

1. DUAL MONO

Note: Can also be changed using the L/R button on the remote control

●Stereo - Left and Right in true stereo

●L - Mono - Left channel only (no vocals) ●R- Mono - Right channel only (no music) ●Mix-Mono - Virtual stereo

2. DYNAMIC

Sets the linear compression ratio to get different compression results.

Optional settings: Off, 1/4, 1/2, 3/4, Full.

General Audio Dolby Video Preference

- - Dolby Digital Setup - -

Dual Mono	Stereo
Dynamic	L-Mono
	R-Mono
	Mix-Mono