Configurations
FRONT PANEL:
4 | 5 | 6 | 7 | 8 | 10 | 13 | 14 | 15 | 16 |
USB |
|
|
|
MIC1 | MIC2 | ECHO | MIC VOL |
1 | 2 | 9 | 3 | 17 | 11 | 12 |
1.POWER - This button is used to turn the AVC7504 “ON” or “OFF”.
2.Direct Track Access - These buttons allow for Direct Track selection. For tracks 5 and up, press the 5+ buttons. For example, to go directly to track 7, you would press 5+ and 2, and to track number 19, press 5+ three times and then 4.
3.OPEN/CLOSE - This button is used to open or close the DISC TRAY.
4.R/L - This button will cycle between four audio playback modes: Stereo, Mono Left, Mono Right, and
Stereo mode, the audio playback is standard R/L audio. In the Mono Left mode, the right channel is removed and replaced with a duplicate left channel. In the Mono Right mode, the left channel is removed and replaced with a duplicate right channel. In the
5.N/P - This button will cycle through six
TV system modes: NTSC, PAL, MULTI, NTSC
6.
- This button is used to go back to the Previous track.
7.
- This button is used to go to the Next track.
8.
- Press this button once to Pause the disc playback. Press this button again to stop the disc playback.
9.
- Press this button once to pause the disc playback. Press this button again to initiate the disc playback.
10.DISC TRAY
11.REMOTE CONTROL SENSOR
12.USB - This is a USB input. the USB input will be accessed only when there is no disc present in the disc tray and the disc tray is closed.
13.MIC1- This is microphone 1 input.
14.MIC2 - This is microphone 2 input.
15.ECHO - This is a Echo Volume control knob. Turn this knob clockwise to increase the echo volume or turn this knob
16.MIC VOL - This is a microphone volume control knob for both the MIC1 and MIC2 inputs. Turn this knob clockwise to increase the microphone volume or turn this knob
17.LED Display
5
