2

INTRODUCTION

AUDIO ANALOGUE does not take any responsibilities in the following cases:

Whenever the operational procedures related to the use and the maintenance of the equipment, as described in this manual, are not respected.

Whenever damages to the equipment occur because of fixing or modifications made from non-authorized staff or because of normal deterioration of the system.

No part of this manual can be reproduced by any means, transmitted or copied for private or public use without private authorization from AUDIO ANALOGUE.

The information contained in this manual is related to the data kept by AUDIO ANALOGUE at the moment of the issue of this publication; AUDIO ANALOGUE has the right to make changes to this document without notice.

The equipment has been designed and manufactured according to the Regulations of the Community 89/336/CEE and is marked CE. This equipment can’t be used for different purposes other than those for which it has been manufactured.

AUDIO ANALOGUE does not take any responsibilities for accidents or damages due to improper use of the equipment.

WARNING

Please do respect the safety standards contained in this manual before starting to operate the equipment.

Do not open the equipment. No further interventions than those described in this manual should be made. For technical assistance, please contact a qualified technician or an AUDIO ANALOGUE dealer.

Not respecting the instructions contained in this manual will invalidate the guarantee terms and conditions.

NECESSARY PRECAUTIONS FOR SAFETY AND MAINTENANCE

ATTENTION: Read the following instructions and precaution carefully and completely before.operating or manteining your Audio Analogue Maestro Class A integrated amplifier.

It’s mandatory to comply with the following regulations to avoid any hazard:

Always disconnect your entire system from AC mains before connecting or disconnecting any cables. The labels containing information about safety must be always visible and in good conditions.

Never block air flow through ventilation slots or heatsink to avoid excessive overheating.

The equipment should be kept to a minimal distance of 15 cm from any object and should not be placed on carpet or other soft surfaces.

Do not switch on the equipment until it has not been correctly and completely installed.

Always supply the equipment with the proper voltage as stated on the rear label. If in doubts about the available supply, please contact a qualified technician or an AUDIO ANALOGUE dealer.

This equipment must be terminated with a three-conductor AC mains power cord which includes an earth ground connection. To prevent shock hazard, all three connections must always be used.

In case of damages occurred to the supply cable, it should be immediately replaced with an other of the same kind. Do not place any objects over the supply cable. The cable shouldn’t be knotted, pinched or abruptly bended. Replace the fuses always with others of the same kind.

Do not use the equipment close to water or other liquids. If any liquid fill in the equipment, the mains plug must be disconnected from the socket avoiding to touch any metal parts. The equipment must be checked by qualified technician before being operated again. Do not place recipients containing liquids on the equipment, even if it is switched off.

Keep the equipment far away from sources of heat such as the solar light, ovens, radiators etc… Always unplug the supply cable during lightning storms.

Always switch off and unplug the mains cable before cleaning the equipment externally: this operation should be made only using a dry and soft cloth. Never use alcohol based cleaning material.

Internal condesation can be formed if the amplifier is carried from an extremely cold environment to an extremely hot one. Please wait at least for an hour before operating it again.

Please unplug the equipment if not used for long periods.

INSTRUCTIONS TO PUT IT OUT OF SERVICE

Consult qualified staff.

Follow the regulations of the current legislation regarding recycling and waste disposal.

Page 1 Page 3
Page 2
Image 2
Audio Analogue SRL AUDIO ANALOGUE INTEGRATED AMPLIFIER owner manual Introduction
Page 1 Page 3

AUDIO ANALOGUE INTEGRATED AMPLIFIER specifications

The Audio Analogue Integrated Amplifier is a pinnacle of audio engineering, renowned for its exceptional build quality and performance. Tailored for audiophiles and casual listeners alike, this amplifier offers a harmonious blend of aesthetics, simplicity, and advanced technology, making it a favorite in the high-fidelity audio community.

One of the standout features of the Audio Analogue Integrated Amplifier is its Class A operation mode. This design allows for a linear amplification without the crossover distortion typically encountered in Class AB amplifiers. Consequently, users can expect a rich, warm sound with stunning clarity and detail, making it ideal for a wide range of musical genres.

The amplifier incorporates high-quality components, including a toroidal transformer and custom capacitors. The toroidal transformer ensures low electromagnetic interference and enhances power supply efficiency, delivering robust dynamics and a wider soundstage. The capacitors, selected for their performance characteristics, contribute to maintaining the integrity of the audio signal.

Special attention has been paid to the signal path, which is kept as short as possible to minimize any potential losses in audio quality. The unit features a sophisticated circuit design, providing low noise and distortion levels, enabling listeners to enjoy music as it was meant to be heard.

Additionally, the Audio Analogue Integrated Amplifier comes with multiple inputs, including line-level RCA and even digital inputs in some models. This versatility allows users to connect a variety of source devices, from turntables to digital streamers. The integrated DAC (Digital-to-Analog Converter) further enhances the capability of the amplifier, ensuring high-resolution playback of digital audio files.

The design of the amplifier is both elegant and functional. Its robust chassis not only enhances durability but also minimizes resonance, crucial for preserving audio purity. The front panel features a user-friendly layout, including a bright display and intuitive controls, making it easy to adjust volume levels and select inputs.

In summary, the Audio Analogue Integrated Amplifier embodies a perfect fusion of innovative technology and timeless design. Whether you are an audio enthusiast seeking unparalleled sound quality or a casual user appreciating high-fidelity music, this integrated amplifier proves to be a worthy investment that promises an extraordinary listening experience.
Top Page Image Contents