9
Remote control – CD player section
•PLAY/PAUSE. By pushing this button, you start CD playback or interrupt/resume CD playback (pause).
•STP/OPEN. By pressing this button, you stop CD playback or open/close CD tray.
•PREV/REW. By pressing this button during playback, you move to the previous CD track or, holding it down for a few seconds, activate fast rewind search. When playback is stopped, you may choose the CD track from which resuming playback or search CD tracks backward.
•NEXT/FFW. By pressing this button during playback, you move to the next CD track or, holding it down for a few seconds, activate fast forward search. When playback is stopped, you may choose the CD track from which resuming playback or search CD tracks forward.
•10+. When the CD player is on stop mode, you may press it together with PREV/NEXT button while looking for a specific track to skip 10 tracks forward/backward. Just press the 10+ button again to deactivate this function.
•TIME. During CD playback the display shows the time elapse since the beginning of the running track (“TIME”). By pressing this button it is possible to show also different time information about the CD playback: residual track time (“TLAP”) and residual CD time (“TREM”).
•STDBY. By pressing this button, you activate/deactivate standby mode.
•REPEAT. This button has two different functions, according to the CD player status. When the CD player is on stop mode, you may choose to repeat a single track or the whole disc by pressing this button one or more times. Select the track to be repeated by pressing PREV/NEXT buttons. By pressing this button at two different times during CD playback, you mark the beginning (A) and ending (B) point of a disk section to be repeated. When this function is selected, you may deselect it just pressing REPEAT button again and the disc will play normally.
