Safety Instructions

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

Caution: To reduce the risk of electric shock, do not remove cover (or back); no user serviceable parts inside. Refer servicing to qualified service personnel.

Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Read Instructions

All the safety and operating instructions should be read before the appliance is operated.

Retain Instructions

The safety and operating instructions should be adhered to.

Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, convenience recep- tacles, and the point where they exit from the appliance.

Heed Warnings

All warnings on the appliance and in the operating instructions should be adhered to.

Cleaning

The appliance should be cleaned only as recommended by the manufacturer.

Follow Instructions

Power Lines

All operating and use instructions should be followed.

An outdoor antenna should be located away from power lines.

Water and Moisture

The appliance should not be used near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

Ventilation

The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in situation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

Heat

The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

Power Sources

The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

Grounding or Polarization

Precautions should be taken so that the grounding or polariza- tion means of an appliance is not defeated.

9300 North Decatur

Portland, OR 978203 Tel. 503.286.9300 Fax 503.978.3302 audiosource@Phoenixgold.com www.audiosource.net

Non-Use Periods

The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

Object and Liquid Entry

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

Damage Requiring Service

The appliance should be serviced by qualified service personnel when: a) The power supply cord or the plug has been damaged;

b)Objects have fallen, or liquid has been spilled into the appli- ance; c) The appliance has been exposed to rain; d) The appli- ance does not appear to operate normally or exhibits a marked change in performance; or e) The appliance has been dropped, or the enclosure damaged.

Servicing

The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

Product Servicing

In the event that your AMP Three fails to operated properly, please contact the dealer where you purchased the unit. Or you may contact AudioSource directly for further assistance.

Printed in Taiwan

Page 4
Image 4
AudioSource AmpThree owner manual Safety Instructions, Risk of Electric Shock Do not Open

AmpThree specifications

The AudioSource AmpThree is a versatile and powerful stereo amplifier designed for audiophiles and casual listeners alike. With a focus on high-quality sound reproduction, this amplifier is known for its exceptional performance, innovative features, and user-friendly design.

One of the AmpThree's standout characteristics is its robust power output. The amplifier delivers 100 watts per channel into an 8-ohm load, providing ample power to drive a wide range of speakers efficiently. Whether used in a home theater setup or as part of a multi-room audio system, the AmpThree ensures that every note is rendered with clarity and precision.

Equipped with a variety of connectivity options, the AmpThree offers flexibility for different audio setups. It includes RCA inputs for connecting various devices such as CD players, televisions, or streaming devices. Additionally, the amplifier features a built-in digital signal processing (DSP) technology, enabling users to customize their listening experience. This feature allows for sound optimization across different spaces and playback scenarios, enhancing audio quality to suit personal preferences.

One of the key technologies incorporated into the AmpThree is its Class D amplification. This modern amplification method is known for its efficiency and reduced heat generation compared to traditional Class A or Class AB amplifiers. As a result, the AmpThree can deliver high output while maintaining a smaller form factor, making it an ideal choice for those with space constraints.

In terms of design, the AudioSource AmpThree boasts a sleek and contemporary look, easily fitting into various home environments. Its front panel is user-friendly, featuring a simple power button, volume control, and input selection. Additionally, it is built with a durable casing that not only enhances its aesthetic appeal but also provides necessary protection for the internal components.

Another noteworthy feature of the AmpThree is its ability to operate in bridge mode, allowing users to combine both channels for a more powerful mono output. This capability is particularly beneficial for driving larger speakers or subwoofers, making the AmpThree a strong candidate for both stereo and home theater applications.

Overall, the AudioSource AmpThree embodies a perfect blend of power, performance, and versatility. With its high-quality audio output, advanced technologies, and thoughtful design, it stands out in the crowded amplifier market, making it a top choice for those seeking a reliable and impressive audio experience. Whether for casual listening or more serious musical pursuits, the AmpThree delivers an auditory experience that is hard to beat.