Audiovox manual Model 105BP, 128-8777 1 of, Transmitter Programming Guide, terminates *Panic

Model 105BP

Transmitter Programming Guide

These transmitters make use of icons (symbols) to identify the reaction your security system/keyless entry/and or remote start system, where applicable, will have when any icon (button) is pressed. These icons are programmed at time of installation to meet the needs of the individual and to complement the vehicle that the system is installed in. To replace a transmitter or add transmitters, please follow the programming instructions listed on the pages of this manual.

	BUTTON	RECEIVER	SYSTEM FUNCTION
		CHANNEL
		1	Lock And Arm Alarm, also initiate and
			terminates *Panic
		2	Unlock And Disarm, also initiates and
			terminates *Panic. Programmable to
			unlock drivers door and or all doors.
			Lock and arm/unlock and disarm. May
		1	be programmed to unlock driver's door
			or all doors. Also will initiate and
			terminate *Panic.
		3	Pulsed or switched output to control
			Remote Trunk Release or optional
			device connected to channel 3.
		3	When pressed and release two times,
			will provide pulsed output or activate the
			Remote Start option when installed.
			When so equipped, this button can be
		*4	used to operate an optional device
			connected to channel 4.
			When so equipped, this button can be
		*5	used to operate an optional device
			connected to channel 5.
* Where So Equipped			1

128-8777

1 of 8