II. PREPARATION OF CONSOLE FOR INSTALLATION
1.Position the O.E.M. console in the front recess area of the new console (item 4 pg 2 ). Carefully fit the two together, aligning the rear compartment hinge arms through the slots in the recess pocket area. See figure 14.
FIGURE 14
2. Secure the O.E.M. compartment assembly into the console recess using (10) ten # 6 X 1/2" screws ( item 9 pg 2 ). Start all screws before tightening beginning with the front center, rear center, then alternately on each side. See figure 15. Caution:
Do not overtighten screws.
FIGURE 15
10
