Audiovox 990 Chrysler-Dodge-Plymouthinstallation, ALLU.S.MADECARS,TRUCKS,ANDVANSBUILTSINCE1974

Models: 990

1 20
Download 20 pages 62.67 Kb
Page 10
Image 10
CHRYSLER-DODGE-PLYMOUTH INSTALLATION

CHRYSLER-DODGE-PLYMOUTH INSTALLATION

9

CHRYSLER-DODGE-PLYMOUTH INSTALLATION

ALLU.S.MADECARS,TRUCKS,ANDVANSBUILTSINCE1974

Important-This radio cannot be installed in any U.S. made Chrysler, Dodge, or Plymouth vehicle without an installation kit. Refer to the Kit Listing on Page 2 for the required kit. Complete kit installation is explained in the instructions included with the kit.

1.RemoveExistingRadio:

A.Remove the existing dashboard trimpanel surrounding the radio opening. This panel is usually secured by screws and/or snap-in clips.

B.Remove the two large screws used to secure radio to the sub-dashboard.

C.Pull the radio forward to access the wiring and antenna cables plugged into the rear of the chassis.

D.Un-plug the wiring harness(es) and antenna cable and remove the radio.

2.InstalltheNewRadio:

A.Follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

B.Place the radio near the dashboard so the wires can be led through the opening and following the instructions of Step 2 on Page 3, carefully wire the radio making certain all connections are secure and insulated and confirm proper operation.

C.Install the radio/mounting plate assembly to the sub-dashboard according to instructions of installation kit.

D.Attach one end of the perforated support strap (supplied) to the screw stud on the radio using the hex nut

provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and nut provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation of the radio due to vibration.

E.Replace the dashboard trimpanel.

F.Install knobs on radio shafts.

 

HELP!

PERFORATEDSTRAP

1-800-645-7102

Monday-Friday 8:30am-7:00pmEastern

HEXNUT

SCREWSTUD

Saturday 9:00am-5:00pmEastern

RADIO

MOUNTINGPLATEFROMKIT

 

(NOTINCLUDEDWITHRADIO)

SCREWSHAFTNUT

ALLU.S.MADECARS,TRUCKS,ANDVANSBUILTSINCE1974 HEXNUT

IMPORTANT

 

AMOUNTINGKITISREQUIRED

EXISTINGDASHTRIMPANEL

FORTHISINSTALLATION

Page 10
Image 10
Audiovox 990 Chrysler-Dodge-Plymouthinstallation, ALLU.S.MADECARS,TRUCKS,ANDVANSBUILTSINCE1974, Help, RemoveExistingRadio