Audiovox ACC-30 installation manual Procedure for 45 Angle Installation

PROCEDURE FOR 45° ANGLE INSTALLATION

Note

If the anti-vibration spring position has been changed and verified for 45° angle mounting (as shown on page 3), start with step 2.

1 Set the anti-vibration springs to position "45°".

position "45°"

	45°
V	H

45°

2

Attach a mounting bracket to each side of the unit, using the 4 hex head bolts with washer base.

Bracket

Bracket

Hex head bolt with washer base

3

Determine the mounting location, and drill four mounting holes.

NOTE: If mounting surface is carpeted, use caution when drilling holes to prevent drill bit from catching on carpet. Cut holes in carpet before drilling into sub-surface.

4

Mount the unit in place, using four self-tapping Phillips head screws.

Use RTV (silicone sealer) on screw threads or around the holes to prevent moisture intrusion.

Self-tapping Phillips head screw

Never mount the unit near the fuel tank.

Drill holes 1/8" (4mm) in diameter

Bracket

Bracket

5