INSTALLATION INSTRUCTIONS

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at 1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Slide the mounting sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, turn the unit on to confirm operation (ignition switch must be “on”). If unit does not operate, re-check all wiring until problem is corrected.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

7.Test radio operation by referring to the Operating Instructions.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully un-snap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION: DO NOT EXCEED M5 X 6 MM MAXIMUM SCREW SIZE.

LONGER SCREWS MAY TOUCH AND DAMAGE COMPONENTS INSIDE THE CHASSIS.

4.Wire the new radio to the vehicle as per step 4 above.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

INSTALLATION INSTRUCTIONS

3

128-6196A

3 of 16

Page 2 Page 4
Page 3
Image 3
Audiovox ACD-12 Installation Instructions, Universal Installation Procedure Using Mounting Sleeve, Installation Using Kits
Page 2 Page 4

ACD-12 specifications

The Audiovox ACD-12 is a compact and versatile car audio system designed to elevate the in-car listening experience. Renowned for its sleek design and user-friendly interface, the ACD-12 combines functionality with contemporary aesthetics, making it an excellent addition to any vehicle.

One of the standout features of the Audiovox ACD-12 is its ability to play various music formats. The system supports CDs, CD-Rs, and MP3-compatible media, allowing users to enjoy their favorite tunes without hassle. With a built-in AM/FM radio tuner, drivers can easily switch between their personal music collections and live radio broadcasts, ensuring a diverse audio experience.

The ACD-12 is equipped with an intuitive interface that includes a large, easy-to-read display. This screen clearly shows track information, radio frequencies, and EQ settings, making it simple to navigate through different functions while on the go. The user-friendly control layout includes oversized buttons for essential functions, enabling quick access to volume adjustments, track selection, and tuning.

In terms of sound quality, the Audiovox ACD-12 does not disappoint. It features a robust built-in amplifier that delivers powerful output, ensuring clarity and depth across different genres of music. Additionally, the device includes customizable equalizer settings, allowing users to fine-tune the audio to their preferences. This feature is particularly useful for audiophiles who appreciate the nuances of their favorite tracks.

Another significant characteristic of the ACD-12 is its compatibility with external devices. The system includes an auxiliary input, which allows users to connect smartphones, MP3 players, or any other audio sources via a standard 3.5mm jack. This flexibility ensures that passengers can enjoy music from a variety of platforms, enhancing the overall driving experience.

Moreover, the Audiovox ACD-12 is designed with durability in mind. Its robust construction ensures that it can withstand the rigors of daily use, making it a reliable choice for car owners. The system's installation is straightforward, accommodating various vehicle models without the need for extensive modifications.

In conclusion, the Audiovox ACD-12 stands out as a high-quality car audio system that integrates advanced features and competitive performance. Its compatibility with multiple audio formats, intuitive controls, and superior sound quality make it a sought-after choice for anyone looking to upgrade their vehicle’s sound system. With the ACD-12, drivers can enjoy a personalized listening experience that enhances every journey on the road.
Top Page Image Contents