COMPACT DISC PLAYBACK
1.Press the 
STANDBY button to turn to function mode.
2.Press OPEN button to insert a CD into the slot with printed side facing upward and close the door.
3.Press the FUNCTION button to select CD mode. After loading the CD, total tracks of the disc will be shown.
4.Press the 
button to begin play.
Note:
LCD display will return to Clock mode after about 15 sec with no further operation.
To Interrupt Playback
•Press the 
button.
•To resume playback, press the 
button again.
To Stop Playback
• Press the 
button.
To Remove the Disc
• Press the OPEN button and take the CD out.
To Review CD Track No.
• Press 
to review CD track no.
Note: This operation will cause instant stop of track playing.
Track Search - Locating a Particular Point In a Track
•Keep the 
or 
button pressed during play and release at the desired point.
-9 -
Tracks Skip - Skipping To The Previous or Next Track
•Press the 
button once to return to the beginning of the current track.
•Press the 
button repeatedly to skip tracks backward one by one.
•Press the 
button repeatedly to skip tracks forward one by one.
Repeat Play
This function will allow a single track or all tracks on the disc to be played repeatedly. REPEAT function can be operated when playing a disc.
1. To repeat the same track, press the PRESET/REPEAT button until “REPEAT” icon lights up on the display.
2. To repeat the disc, press the PRESET/REPEAT button until “REPEAT ALL” icon lights up on the display.
3. To cancel repeat play, press the PRESET/REPEAT button
until “REPEAT” icon disappears from the display.
Note:
LCD display will return to Clock mode after about 15 sec with no further operation.
Program Play
Program play allows the selected tracks play in desired order. Program function can only be operated in stop mode.
1.Turn on the power and press the FUNCTION button to select CD mode.
-10 -
2.Press MEMORY/SET button (in stop mode), first “2”will appear for about 2 seconds and then “” will flash on the display.
3.Press 
or 
button to select the desired track. Then press MEMORY/SET button to store the track in memory.
4.To add additional tracks, repeat setp 2 ~ 3.
Notes:
•Check the program order.
•Press MEMORY/SET button repeatedly.
•To stop program play, press STOP button or select other function by pressing FUNCTION button.
•The same track can be selected more than once in the same program.
•A maximum of 20 tracks can be programmed.
•With program on, the 
or 
skip function is available only for the selected tracks.
•REPEAT play can be performed during program play.
CONNECTING HEADPHONES
Connect headphones (Dia. 3.5mm stereo mini plug) to the PHONE jack. When the headphones are connected, speaker sound will be automatically disconnected.
- 11 -
Alarm Clock
AM/FM Radio
With CD Player
INSTRUCTION MANUAL
For best results, please read this manual carefully before using the unit.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE.
TO AVOID ELECTRICAL SHOCK, DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
WAKE UP TO ALARM (TUNER,CD OR BUZZER)
The TUNER, CD or BUZZER automatically sounds at the designated time everyday. You can set two different kinds of alarm time, one for ALARM 1 and the other for ALARM 2.
Setting Alarm 1 (Same As Setting ALARM 2)
1. Press STANDBY button to return to clock mode.
2. Press ALARM 1 button until “
” and alarm time start to flash.
Note:
If ALARM 1 button is pressed again, this operation will go cycle until wake up mode (TUNER, CD or BUZZER) is confirmed by pressing MEMORY/SET button.
3. Press 
button to adjust hour.
4. Press 
button to adjust minute.
5. Press MEMORY/SET button to confirm Alarm 1 wake up time. And “ 
” appears on the display which means ALARM 1 has been set.
- 12 -
Alarm On with Tuner, CD and Buzzer
When the designated alarm time comes, the selected sound source (TUNER, CD or BUZZER) will be triggered and the ALARM symbol will start to flash.
Turn Off the Alarm
To turn off the alarm, press STANDBY, ALARM 1 or ALARM 2 button. The alarm will go off instantly until the same time next day.
Important note:
In case of wake up with TUNER or CD, no other operation such as CD Stop can be made until turn off the alarm by pressing STANDBY, ALARM 1 or ALARM 2, and then change the unit to TUNER or CD mode for further operations.
To Review the Set Alarm Time
• Press ALARM button while the unit is in power off.
To Cancel Alarm Mode
•Press ALARM button until all wake up modes (TUNER, CD or BUZZER) disappear from the display, then press MEMORY/SET button to confirm.
Snooze
•Press SNOOZE button allows you to enjoy another 5 minutes’ sleep. Alarm will be on again after 5 minutes of each press of SNOOZE button until STANDBY, ALARM 1 or ALARM 2 button is pressed.
-13 -
CARE AND MAINTENANCE
General Guidelines
•Do not touch the laser lens on the CD player.
•Temperature changes may cause condensation on the laser lens. If condensation forms on the lens, leave the unit for about an hour until condensation evaporated.
•Do not leave the unit exposure directly under sunlight or extreme heat such as inside a car parked in the sun. This can cause damage or malfunction.
•To prevent dust from reaching internal components, do not leave compartment door such as back up battery door opened at all time.
•Do not cover unit with cloth.
Handling of Compact Disc
•Although the music tracks in the disc are covered with enclosure, it is still advisable to treat the disc carefully. Always pick up the disc by the edge and put them back in the holders immediately after use.
•Always wipe the compact disc from centre to the edge of disc with a piece of velvet or soft dry cloth.
TROUBLE SHOOTING GUIDE
CD |
|
|
Problems | Solutions | |
|
|
|
System does not turn | • | Make sure the STANDBY button is set to |
on. |
| ON. |
| • Make sure press the FUNCTION button to | |
Disc in place but unit |
| CD mode. |
won't play. | • | Make sure disc is clean and undamaged. |
| • | Make sure printed side of disc is facing up. |
| • | Make sure PAUSE mode is not activated. |
|
|
|
|
| - 14 - |
RADIO |
|
|
Problems | Solutions | |
Poor FM reception | • Make sure FM antenna wire is fully extended. | |
| • | Electrical interference in your home can |
|
| cause poor reception. Move the unit away |
|
| from them (especially those with motors |
|
| and transformers). |
Poor AM reception | • | Rotate the unit horizontally. |
|
|
|
CLOCK |
|
|
Problems | Solutions | |
|
| |
Clock does not show | • There has been an electrical power | |
the correct time. |
| interruption. |
Alarm does not come | To turn on the TUNER, CD or BUZZER alarm, | |
on at the preset time. | check the following points: | |
| • | Is the current time correctly set on the time |
|
| display? Check the AM/PM indication. |
| • | Is the alarm time correctly set? Check the |
|
| AM/PM indication. |
| • | Is the desired station tuned in? |
|
|
|
SPECIFICATIONS
Power consumption: 8W
Power requirements: AC 120V - 60Hz
DC 9V
Specifications are subject to change without notice.
Printed in China |
