Audiovox AMP-610 manual Help, High Performance Stereo Amplifier, Specifications

HIGH PERFORMANCE STEREO AMPLIFIER

This power amplifier has been designed to provide high quality performance with a minimum of maintenance. However, it's performance will only be as good as the care and quality of components with which it is installed. We therefore advise that you read these instructions very carefully to familiarize yourself with the product and it's features.

Should you require assistance with the installation or wiring of this unit, please call our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.

HELP!

1-800-645-4994

Monday - Friday	8:30am	-	7:00pm	Eastern
S a t u r d a y	9:00am	-	5:00pm	Eastern

SPECIFICATIONS

Maximum Output Power		Signal / Noise Ratio:	90 dB (A-Weighted)
4-Channel Operation:	125 watts x 4	Input Impedance:	low-level 10K ohms
2-Channel Operation:	500 watts x 2
			high-level 100 ohms
Output Power @ 1% T.H.D.
		Input Sensitivity:	low-level 200 mv. - 5 v.
4-Channel Operation:	600 watts RMS x 4
			high-level 2 - 10 v.
2-Channel Operation:	120 watts RMS x 2
		Supply Voltage:	12 volts, negative ground
Output Impedance:	2 - 8 ohms (stereo)
		Fuse Rating:	20 amps.
	4 - 8 ohms (mono)
		Dimensions (W x H x D):	9"	x 2-1/4" x 10-5/8"
Frequency Response:	10 - 50,000 Hz. ± 1 dB
			230 mm x 57 mm x 270 mm
Channel Separation:	55 dB

*Due to continuing improvement, Audiovox reserves the right to change features and design without notice. -1-