Data Module Specifications | GE A8950CC specs

Data Module Specifications

Model

A8910MPD duplex data module

Mechanical

Size:

0.75 in. W x 3.30 in. H x 8.88 in. L (19 x 84 x 226 mm)

Weight:

4.0 oz. (113 g)

Connections:

RJ45 or factory-supplied breakout box

Data

•Channels: 4 duplex

•Formats: RS-232 (3-wire/5-wire), TTL, RS-422 (2-wire/4-wire), RS-485, Manchester, Biphase, Sensornet

•Baud rate: DC to 512 kbps (depending on data format)

•Bit error rate: > 10-9

•Test signal: Internally generated RS-485 signal

Product Ordering

Model

Part number

Duplex data module

A8910MPD

46

Image 48

GE A8950CC installation instructions Data Module Specifications

Contents

Installation instructions Installation Instructions Before You Begin Intended UseCustomer Support Conventions Used in this Manual Installing Power Supplies Module InstallationGetting Started Overview Installing the Optical Transceiver Module Installation instructionsTools and materials required Connect fiber Point-to-Point Connect Repeater ConnectSelf-Healing Connect LED operating status Optic LED Installing the Data Module Configure data moduleSetting Mode Install data module Connect Using the breakout box Fiber Link Data Connections Pin Signal RS-485 4-WIRE Interface Data module channel sequence Installing the Ethernet Module Install the Ethernet module Configure Installing the Video Module Install video input moduleInstall video output module Connection instructions Video InputsVideo Outputs Video Input module channel sequence Video Output module channel sequence Installing the Audio Module Configure audio module Installing audio modules Channel sequence is as follows Connecting to audio modules Audio module channel sequence Terminal Block Pin Assignments Installing the Contact Closure Module Install contact closure module Connect to the module RJ45 Socket Viewed from the rear of the unit Contact Input module channel sequence Configuring the Phoenix Fiber Optic Communications System Turn on power and check status Select the system topology GE Security Set the Node ID Front Panel Menu Tree and Descriptions Main Menu Main LocalMain Local Node Main Local Node ID Main Local Node Topology Main Local Node Load Defaults Main Local OpticsMain Local Optics Transmit Main Local Optics Receive Main Local Optics Info Main Local VideoMain Local Video Input Mapping Main Local Video Output Mapping Video Test Channel Test Off Format Ntsc Main Local Data Main Local Data Input Mapping Main Local Data Output Mapping Main Local Data Format Select Main Local Ethernet Main Local Ethernet Port StatusMain Local -Ethernet Port Control Main Local -Ethernet Port Traffic Main Local Audio Main Local Audio Input MappingMain Local Audio Output Mapping Main Local Audio Test Main Local ContactsMain Local Contacts Input Mapping Main Local Contacts Configure Main Local Contacts Output Mapping Main Local Power Main Local Test Main Local Test LED/LCD/Alarm Main Local Test TempMain Local Test Video Main Local Test Data Main Remote Main About Blank Panel Installation and Specifications Overview Limited warranty Optical Transceiver Module Specifications Product ordering Data Module Specifications Data Ethernet Module Specifications Ethernet Video Module Specifications Video Audio Module Specifications Product 0rdering Contact Closure Module Specifications Contacts / Relays