GE A8950CC Connect to the module, RJ45 Socket Viewed from the rear of the unit

2. Connect to the module:

Each contact closure module is shipped with (four) RJ45 cables and (four) breakout boxes to aid in connecting to the Phoenix. Use the tables below to determine pin out information for your application. GE Security recommends using shielded cable for all single ended applications and shielded twisted-pair for all differential formats.

Wire gauge is dependent on copper run length. Refer to manufacturer of data equipment for specific recommendations.

Figure 1. Terminal Block Pin Assignments

54

6	3
7		2
8		1

Using the breakout box

A breakout box with a 3’ CAT 5 patch cord (supplied) can be used to interface to the Phoenix system. Pinouts are shown in the tables and figures below.

Figure 2. RJ45 Socket

(Viewed from the rear of the unit)

Pin

1 8

RJ45-A

RJ45-B

RJ45-C

RJ45-D

21