1.Enter the vehicle, and turn the ignition key to the on position.

2.Press and hold the valet pushbutton switch until the dash mounted LED turns on solid. The system will remain in the valet mode.

3.To return to normal operation, press and release the pushbutton switch any time the

ignition is on.

NOTE: Always remember to return the vehicle to the valet off position. This will ensure that the vehicle remains protected at all times.

MANUALLY OVERRIDING YOUR SYSTEM:

USING THE VALET SWITCH MANUAL OVERRIDE

Your Security System can be disarmed without the use of the keychain transmitter. This is necessary, since you will need the ability to operate your vehicle if the transmitter is lost or its battery fails. If your system has been selected for Valet Switch manual override as indicated on the last page of this manual, to by-pass the alarm system;

1.Open the vehicle door. The alarm will sound.

2.Turn the ignition key to the on position.

3.Within 5 seconds, press and release the valet pushbutton switch.

The alarm system will stop sounding and enter the (by-passed) mode. You can now start and operate the vehicle normally.

Typically this override mode is used only if the transmitter has become inoperative.

Programming Your Custom Override Code:

Unlike override switches easily found, and defeated, this security system allows the con- sumer to program a personal override code, offering a higher level of security. To take advantage of this option, programmable feature # 10 must be selected for the Custom Code Option. Consult your installation center for programming details. The system comes from the factory with a pre-programmed override code of 11.To change this default override code, do the following:

1.Disarm the system by use of the transmitter, or by use of the emergency override sequence. Turn the ignition switch to the on position.

2.Within 10 seconds, press and release the valet/override switch, 3 times.

3.Within 10 seconds turn the ignition switch off, on, off, on, off, on. (The siren or horn will beep and the lights will flash one time.)

4.Within 10 seconds, begin to enter your chosen 10ths digit by pressing and releasing the pushbutton switch from 1up to 9 times.

5.Within 10 seconds of the last entered 10ths digit, turn the ignition switch off then on.

6.Within 10 seconds, begin to enter your chosen units digit by pressing and releasing the pushbutton switch from 1 up to 9 times.

7.Finish by turning the ignition switch to the off position.

If the new code was accepted, the unit will report back the newly entered code, by flashing the LED, first indicating the 10ths digit, pause and then the units digit. The unit will report the new code three times with a one second pause between each code, then the system will begin arming. If the LED flash pattern reports the previously stored code, the new code was not entered correctly. Please repeat steps 1 through 7 above considering the following.

NOTE: Acceptable digits 10ths or units are 1 through 9. The unit will not recognize a 0 (Zero), or no digit entered in any place, units or tenths.

NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code.

Page 5

128-6530

5 of 10

Page 4 Page 6
Page 5
Image 5
Audiovox APS-786 owner manual Programming Your Custom Override Code
Page 4 Page 6

APS-786 specifications

The Audiovox APS-786 is a state-of-the-art car alarm and remote start system designed to provide unparalleled security and convenience for car owners. This comprehensive system stands out in the market due to its impressive array of features, innovative technologies, and user-friendly characteristics.

One of the key highlights of the APS-786 is its advanced two-way communication capability. This feature enables the owner to receive real-time status updates on their vehicle, including notifications of unauthorized entry attempts. The inclusion of a vibrant LCD remote not only enhances communication but also allows users to interact with their vehicle from a distance, providing peace of mind and increased security.

In terms of security, the APS-786 is equipped with a high-powered siren that is capable of delivering attention-grabbing alerts in the event of a breach. The system uses a combination of shock sensors, door triggers, and hood/ trunk protection to detect any suspicious activities. For added safeguarding, the APS-786 includes features such as a starter disable function and a built-in anti-grind relay to thwart potential theft attempts.

Another notable feature of the Audiovox APS-786 is its integration of remote start functionality, which allows users to start their vehicles from a considerable distance. This is particularly advantageous in extreme weather conditions, as it allows the vehicle's interior to reach a comfortable temperature before the driver even enters.

The system's installation flexibility is also a significant advantage. It is designed to fit a wide range of vehicles, making it a versatile choice for various automotive applications. Additionally, the APS-786 supports keyless entry, allowing users to unlock their doors conveniently without fumbling for keys.

Furthermore, the APS-786 employs frequency-hopping spread spectrum technology, which enhances the communication range and reduces the likelihood of signal interference. This technology, combined with extended range capabilities, ensures that users can monitor and control their vehicle effectively, even in challenging environments.

In summary, the Audiovox APS-786 is a versatile and powerful car alarm and remote start system that combines advanced security features with user-friendly options. Its combination of two-way communication, shock sensors, remote start capabilities, and modern technological advancements makes it a compelling choice for anyone looking to enhance their vehicle's security and convenience.
Top Page Image Contents