When you arrive at your vehicle, disarm the alarm system by pressing and releasing the Disarm button of your keychain transmitter. Enter the vehicle and turn the ignition key to the on position.
CAUTION ! Do not turn the key to the start position. This will cause the starter motor to engage with the already running engine which could result in damage. Step on the brake pedal to disengage the remote start unit. The vehicle will continue to run but now on it's own power.
NOTE: The engine will stop running before the expiration of the
1.Press and release trunk/key button of your keychain transmitter two times within 2 seconds.
2.Depress the brake pedal.
3.Open the hood.
4.Move the red handled control switch to the off position.
5.Race the engine to above 4000 RPM.
OPERATING ON AUTOMATIC START UP TIMER MODE
The
CAUTION ! Be certain that the vehicle is outdoors before using this or any remote vehicle starting device. A running engine produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if it is garaged.
TO BEGIN THE AUTOMATIC START UP TIMER
1.Turn the ignition key on then off.
2.Within 10 seconds, activate the RF start command two times. (Push the trunk/key button
of your keychain transmitter 4 times).
The parking lights will flash and the siren will chirp 4 times indicating the timed start mode is activated.
The vehicle, on a 2 or 4 hour interval basis, will automatically start, run for the
To do this:
1.Start the vehicle using the keychain transmitter by pressing and releasing the trunk/key button 2 times.
2.Shut off the vehicle using the keychain transmitter by pressing and releasing the trunk/key button 2 times.
3.Within 10 seconds of step 2, activate the RF start command two times. (Push the
trunk/key button of your keychain transmitter 4 times).
The parking lights will flash and the siren will chirp 4 times indicating the timed start mode is activated.
CANCELING THE AUTOMATIC START UP TIMER
To cancel the automatic start up timer do one of the following:
1.Start the vehicle manually with the use of the ignition key and depress the brake pedal.
2.Remote start the vehicle using your keychain RF transmitter.
ADDITIONAL REMOTE FUNCTION CHANNEL 3
The system has an additional feature, (Channel 3) ,that can be connected to a number of different optional accessories. Some of the more common uses for this channel are:
GRemote Trunk Release
Page 8
128-6530
8 of 10