Remote Panic Operation

NOTE: If the vehicle battery is disconnected then reconnected, the unit will return to the default setting of chirps on. Repeat the above procedure to eliminate the arm/disarm chirps.

The Lock or Unlock button on your keychain transmitter also functions as a panic switch for use in emergency situations. To use remote panic,

1.Press and hold the Lock or Unlock button on the keychain transmitter for 3 or more seconds. The alarm will immediately sound.

2.To stop the alarm, press and hold the Lock or Unlock button on the transmitter again for 3 seconds. If the button is not pressed, the alarm will automatically stop after 30 seconds. Also if any transmitter button other than the Lock or Unlock button is pressed and released, the Panic mode will be turned off immediately. The normal function of this

transmitter button will be suspended during the Panic sounding period.

NOTE: While in the Panic mode, pressing and releasing the Lock, or the Unlock buttons will, if the option is installed, lock and unlock the doors respectively. While in the panic mode, anytime the unlock button is pressed, the panic feature will continue for the allotted 30 seconds, however, the security system will be disarmed allowing the vehicle to start.

SAFETY (Red Handled ) CONTROL SWITCH

The control switch allows you to temporarily disable the remote starting function of your system. To disable the unit, move the red handled control switch to the off position.

The control switch also allows you to select between 2 hour start up and 4 hour start up when using the automatic start up timer mode. The factory preset start up time for this mode is every 4 hours. To select between 2 or 4 hour start up timer:

1.Begin with the control switch in the on position

2.Turn the ignition switch on then off

3.Within 10 seconds, move the control switch off, on, off, on (2 switch cycles) to select a 2 hour start timer. After 10 seconds expire, the parking lights will flash and the siren will chirp 2 times confirming that the two hour start cycle is set. Or, within 10 seconds move the control switch off, on, off, on, off, on, off, on (4 switch cycles) to select a 4 hour start

timer. The parking lights will flash and the siren will chirp four times confirming that the four hour start timer is set.

REMOTE STARTING THE VEHICLE

The unit WILL NOT start the vehicle if any one of the following conditions exists:

1.The Vehicle Hood Is Opened.

2.The Gear Selector Is In Any Gear Other Then Park.

3.The Brake Is Depressed.

4.The Safety Control Switch Is In The Off Position.

CAUTION! Be certain that the vehicle is outdoors before using this or any remote vehicle starting device. A running engine produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if it is garaged.

To Remote Start The Vehicle:

Press and release the trunk/key button of your keychain transmitter two times within 2 seconds. The vehicle will start and remain running for the pre-programmed 5, 10, 15, or 20 minutes. As a visual indication, the parking lights will flash or turn on depending on the programming set up by your installation center.

Page 7

128-6530

7 of 10

APS-786 specifications

The Audiovox APS-786 is a state-of-the-art car alarm and remote start system designed to provide unparalleled security and convenience for car owners. This comprehensive system stands out in the market due to its impressive array of features, innovative technologies, and user-friendly characteristics.

One of the key highlights of the APS-786 is its advanced two-way communication capability. This feature enables the owner to receive real-time status updates on their vehicle, including notifications of unauthorized entry attempts. The inclusion of a vibrant LCD remote not only enhances communication but also allows users to interact with their vehicle from a distance, providing peace of mind and increased security.

In terms of security, the APS-786 is equipped with a high-powered siren that is capable of delivering attention-grabbing alerts in the event of a breach. The system uses a combination of shock sensors, door triggers, and hood/ trunk protection to detect any suspicious activities. For added safeguarding, the APS-786 includes features such as a starter disable function and a built-in anti-grind relay to thwart potential theft attempts.

Another notable feature of the Audiovox APS-786 is its integration of remote start functionality, which allows users to start their vehicles from a considerable distance. This is particularly advantageous in extreme weather conditions, as it allows the vehicle's interior to reach a comfortable temperature before the driver even enters.

The system's installation flexibility is also a significant advantage. It is designed to fit a wide range of vehicles, making it a versatile choice for various automotive applications. Additionally, the APS-786 supports keyless entry, allowing users to unlock their doors conveniently without fumbling for keys.

Furthermore, the APS-786 employs frequency-hopping spread spectrum technology, which enhances the communication range and reduces the likelihood of signal interference. This technology, combined with extended range capabilities, ensures that users can monitor and control their vehicle effectively, even in challenging environments.

In summary, the Audiovox APS-786 is a versatile and powerful car alarm and remote start system that combines advanced security features with user-friendly options. Its combination of two-way communication, shock sensors, remote start capabilities, and modern technological advancements makes it a compelling choice for anyone looking to enhance their vehicle's security and convenience.

Audiovox APS-786 owner manual Remote Panic Operation, Remote Starting the Vehicle

Models: APS-786